NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 32 GB DDR4 2666 ECC LRDIMM module for upgrading the 27-inch iMac Pro (Late 2017)
This 32 GB DDR4 2666 ECC LRDIMM module is built for the Apple iMac Pro (Late 2017). It targets owners of model iMacPro1,1 (A1862, EMC 3144) who need to expand memory capacity with server-grade registered memory. The single 288-pin stick installs directly into the workstation’s DIMM slots.
Operating at 1.20 V, the module runs at standard DDR4 voltage without a heat spreader. Load-reduced buffering reduces electrical load on the memory controller, helping keep power draw and thermals predictable during sustained workloads. No active cooling is required on the module itself.
This part replaces or supplements the factory-installed memory in the 2017 iMac Pro when the original capacity limits multitasking or large-dataset work. The jump is worth it when applications exceed the current memory ceiling and the system supports the 2Rx4 ECC LRDIMM configuration. It does not suit non-ECC consumer platforms or earlier iMac models.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Apple Mac RAM Memory Upgrades |
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Mac Systems |
| Features | Major Brand Chips |
Power down, unplug, and lay the iMac face-down on a soft cloth. Remove the memory access door using the button. Insert the module until the ejectors click. The step often missed is pressing firmly on both ends until the ejectors lock automatically.
No firmware updates are required for the memory itself. The module has no moving parts and no heat spreader, so it does not wear out under normal use. Replacement is only needed if a hardware fault appears.
The memory operates at 1.20V with a 2Rx4 rank configuration. Under sustained heavy load the first limit is the DDR4 2666 speed ceiling; the module cannot exceed its rated 2666 MT/s data rate.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟