OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
32 GB DDR4 2933 ECC registered DIMM with CL21 latency and 1.2 V operation
This 32GB registered DDR4 module operates at 2933MHz with CL21 latency and 1.20V voltage. It uses a 2Rx4 organisation and major-brand chips on a 288-pin DIMM. The part replaces HP part numbers P11770-001, P13210-001 and P28225-B21 in compatible server and workstation platforms.
At the JEDEC-standard 1.20V the module runs at normal DDR4 power levels without elevated heat output. Registered buffering reduces electrical load on the memory controller, helping maintain stable temperatures in densely populated servers. No extra cooling beyond standard chassis airflow is required.
A-Tech validates every module through quality-assurance testing before shipment. The lifetime warranty covers the memory for as long as you own it, and United States technical support is available before, during and after purchase. Buyers who need capacity beyond a single 32GB module or who require non-ECC unbuffered memory for consumer platforms should look elsewhere.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Align the notch on the module with the slot key, press firmly until both retention clips click shut, then verify the system detects the full 32 GB at 2933 MHz in BIOS.
No routine maintenance is required; replace only if memory diagnostics report uncorrectable ECC errors or the module fails to initialise at 1.2 V.
The CAS latency of 21 cycles at 2933 MHz sets the timing floor, so sustained throughput is bound by that latency before thermal or voltage limits are reached.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟