OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
32GB DDR4 2933MHz ECC RDIMM module with CL21 latency and 1.20V operation
This A-Tech module is a 32GB DDR4 2933MHz ECC registered DIMM built for server and workstation systems. It uses major-brand chips and runs at the standard 1.20V DDR4 voltage. The single 288-pin module targets administrators upgrading compatible Samsung M393A4K40CB2-CVF or M393A4K40DB2-CVF configurations.
The registered ECC design with 2Rx4 rank organisation is the specification that decides fit. Your system must accept registered ECC DDR4 DIMMs with this exact rank layout; unbuffered or non-ECC slots will not work. Verify the motherboard or server manual lists RDIMM support before ordering.
A single 32GB stick comfortably handles moderate virtualisation hosts, database buffers and multi-user workloads. Headroom disappears when the memory controller reaches its maximum supported capacity or when the application working set exceeds the installed total, requiring additional modules or higher-density parts.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at DDR4 2933 (PC4-23400) with a CAS latency of 21, providing the rated transfer speed when the platform runs memory at that frequency.
As a registered DIMM with ECC, it presents a controlled electrical load to the memory controller and corrects single-bit errors, which is required for the server platforms that support this module type.
It uses a standard 288-pin DDR4 DIMM form factor, so it fits any DDR4 RDIMM slot with sufficient height clearance for a 32 GB registered module.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟