EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 32 GB DDR4 3200 ECC registered DIMM with 2Rx4 organisation, CL22 latency and 1.2 V operation, validated as a replacement for Cisco 15-107238-01 and UCS-MR-X32G2RW
This 32 GB DDR4 module is a registered ECC DIMM built for server and workstation platforms that require error-correcting memory. It operates at 3200 MHz with a CAS latency of 22 and a standard 1.20 V supply. The 2Rx4 organisation suits systems qualified for the Cisco 15-107238-01 and UCS-MR-X32G2RW part numbers.
The single specification that decides fit is the registered ECC RDIMM format; unbuffered or non-ECC modules will not work in the target platforms. Verify that your motherboard or chassis documentation lists support for DDR4 3200 registered ECC memory before ordering.
Under continuous load the registered buffer reduces electrical loading on the memory controller, helping maintain signal integrity at 3200 MHz. The 1.20 V operation keeps power draw steady during extended compute tasks, and the ECC function corrects single-bit errors without halting the system.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Cisco |
| Model | 15-107238-01, UCS-MR-X32G2RW |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | 15-107238-01, UCS-MR-X32G2RW |
The module runs at DDR4 3200 MHz (PC4-25600) with CL22 latency at 1.20 V, delivering the rated bandwidth when the platform supports that data rate.
As a registered DDR4 DIMM, it presents a 288-pin form factor and relies on the memory controller to enable ECC and registered buffering at up to 3200 MHz.
It requires a standard 288-pin DDR4 DIMM slot; the 2Rx4 organisation fits any server board that accepts registered ECC modules of this height.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟