A-Tech 16GB (2x8GB) DDR5 5600MHz SODIMM CL46 1.1V 262-Pin Laptop RAM Kit
- 16GB (2 x 8GB)
- 262-Pin DDR5 SO-DIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 32 GB DDR5 laptop module running at 5200 MHz with CL42 latency and 1.1 V operation
Speed DDR5 5200 (PC5 41600)
This A-Tech module delivers 32 GB of DDR5 5200 memory in a single 262-pin SO-DIMM. It runs at CL42 latency and the standard 1.10 V DDR5 voltage. The unbuffered, non-ECC design fits laptop, notebook and all-in-one systems that accept DDR5-5200 SO-DIMMs.
Buyers who want to populate a single slot with 32 GB will match this part to a compatible DDR5 platform. It is not for systems that require ECC or registered memory, nor for builds needing multiple matched modules beyond what the board supports.
One 32 GB module fills a slot completely, so the platform must support that density per slot. If the system limits per-slot capacity lower, this module will not work. Check the maker's qualified-vendor list before ordering.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR5 Laptop Memory RAM |
| Model | A-Tech 32GB DDR5-5200 Laptop RAM Module |
| Capacity | 32GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | CL42 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | AMD & Intel Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
This module uses the standard 262-pin DDR5 SO-DIMM form factor. It fits any laptop, notebook, or all-in-one computer that accepts DDR5-5200 SO-DIMM memory. Verify your system's supported memory specifications before purchase.
Power off the laptop and disconnect the battery if accessible. Insert the module at an angle into the SO-DIMM slot until the gold contacts are mostly hidden, then press down firmly until the side clips click. The step often missed is pressing down hard enough to fully seat both retention clips.
No firmware updates or ongoing maintenance are required for this memory module. It operates at the standard DDR5 voltage of 1.1V with CL42 latency. If a future BIOS update changes memory training, the module will retrain automatically on boot.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟