A-Tech 4GB DDR3L 1333 ECC UDIMM 2Rx8 1.35V 240-Pin Server RAM
- 4GB
- DDR3L 1333 (PC3L 10…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
4GB DDR3 1866 ECC unbuffered DIMM with CL13 latency and 1.5V operation for servers and workstations
Capacity 4GB
This 4 GB DDR3 1866 ECC UDIMM adds error-correcting memory to compatible servers and workstations. The unbuffered 240-pin DIMM runs at 1.5 V with CL13 latency. It is built for systems that require ECC unbuffered DDR3 modules only and will not fit desktop or laptop platforms.
Dual-rank 2Rx8 organisation lets the module handle steady multi-threaded loads such as virtualisation or database tasks without the throughput dips seen in single-rank sticks. ECC circuitry corrects single-bit errors on the fly, keeping data integrity intact during long compute sessions. Major-brand chips are tested for stable operation at the rated 1866 MHz speed.
Standard 1.5 V DDR3 voltage keeps power consumption within normal limits for DDR3 server DIMMs. The unbuffered design avoids the extra register heat found in registered modules, so airflow requirements stay modest. No additional cooling beyond typical server chassis airflow is needed for reliable operation.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 4GB 2Rx8 PC3-14900E |
| Capacity | 4GB |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module operates at standard 1.50 V DDR3 voltage and has no moving parts, so it adds minimal heat and produces no audible noise under sustained use.
You need a server or workstation board with a 240-pin DDR3 DIMM slot that supports ECC unbuffered memory at 1866 MHz (PC3-14900).
The system will typically clock all modules to the lowest common speed and adjust timing; mixing ranks is supported but population rules depend on the platform's memory controller.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟