نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 240-pin DDR3L UDIMM module with black chips

A-Tech

A-Tech 4GB DDR3L 1600 ECC UDIMM 1Rx8 1.35V Server Memory

SKU CH-8H1Q-SJDPE

4GB DDR3L 1600 ECC unbuffered DIMM with 1Rx8 organisation and 1.35V low-voltage operation

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 4GB DDR3L 1600MHz ECC UDIMM boosts server multitasking
  • CL11 latency and 1.35V low voltage cut power draw
  • 1Rx8 unbuffered design fits 240-pin DDR3 slots
  • Major-brand chipset tested for reliable 24/7 operation
  • Direct replacement for Crucial CT51272BD160BJ module

Server ECC UDIMM for workstations

This 4 GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V operation. It is built as a 1Rx8 unbuffered DIMM with error-correcting code for data integrity. The part replaces the Crucial CT51272BD160BJ in compatible server and workstation platforms.

DDR3L limits voltage and platform support

DDR3L requires a memory controller that accepts 1.35 V; systems wired only for 1.5 V DDR3 will not run this module correctly. The 240-pin UDIMM form factor fits desktop-class server boards but will not install in registered DIMM slots or 262-pin SO-DIMM sockets.

ECC unbuffered decides fit

The single specification that determines compatibility is the ECC unbuffered design. Boards that require registered ECC or non-ECC memory cannot use this module; verify your system documentation before purchase.

أبرز المميزات

  • 4GB DDR3L 1600MHz ECC UDIMM boosts server multitasking
  • CL11 latency and 1.35V low voltage cut power draw
  • 1Rx8 unbuffered design fits 240-pin DDR3 slots
  • Major-brand chipset tested for reliable 24/7 operation
  • Direct replacement for Crucial CT51272BD160BJ module

المواصفات

BrandA-Tech
SeriesCompatible Replacement for Crucial
ModelCT51272BD160BJ
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesCT51272BD160BJ

أسئلة حول هذا المنتج

Should I choose this 4 GB DDR3L 1600 ECC UDIMM or look for a higher-capacity module?

This is a single 4 GB DDR3L 1600 module running at 1.35 V with ECC and CL11 latency; add more identical modules if your board has free 240-pin slots and supports the total capacity you need

What does the 1600 MHz rating mean once the stick is installed in a server?

The module operates at DDR3L 1600 (PC3L-12800) with CL11 timing, delivering ECC-protected, unbuffered data transfer at the bus speed your platform negotiates

Is the 240-pin DDR3L interface compatible with standard DDR3 slots and what voltage does it actually use?

It fits 240-pin DDR3 DIMM sockets and runs at 1.35 V DDR3L voltage; the system must support DDR3L operation for the module to function correctly

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.