BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00278842BTC
متوفر
A-Tech
A-Tech 4GB DDR4 2133MHz CL15 1.2V HP 798033-001 834931-001 T0E50AA Desktop RAM
A 4GB DDR4 2133MHz CL15 desktop module rated at 1.2V for HP 798033-001, 834931-001 and T0E50AA systems
- Capacity4GB
- SpeedDDR4 2133 (PC4 17000)
- Tested Frequency2133
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- 4GB capacity adds multitasking headroom for everyday workloads
- DDR4 2133MHz speed matches PC4-17000 system requirements
- CL15 latency at 1.2V delivers stable standard-voltage operation
- 288-pin unbuffered DIMM fits compatible HP desktop slots
- Replaces HP part numbers 798033-001, 834931-001, T0E50AA for drop-in upgrades
Capacity and fit
This 4 GB DDR4 module uses the 288-pin DIMM form factor and runs at 2133 MHz with CL15 latency. It is an unbuffered non-ECC stick rated at 1.2 V, built as a direct replacement for HP part numbers 798033-001, 834931-001 and T0E50AA. The single-rank layout suits mainstream desktop boards that accept standard DDR4 memory.
Thermals and power
At the standard 1.2 V DDR4 voltage the module draws minimal power and produces little heat during typical desktop workloads. No active cooling is required because the low-density 4 GB design stays well within normal operating temperatures. Silent operation is assured as there are no moving parts on the memory itself.
Sustained workload behaviour
Under continuous multitasking or extended background tasks the stick maintains its rated 2133 MHz speed without throttling. The major-brand chips and factory testing provide stable timing at CL15 across long sessions. Error-free operation is supported by the unbuffered architecture and standard voltage level.
أبرز المميزات
- 4GB capacity adds multitasking headroom for everyday workloads
- DDR4 2133MHz speed matches PC4-17000 system requirements
- CL15 latency at 1.2V delivers stable standard-voltage operation
- 288-pin unbuffered DIMM fits compatible HP desktop slots
- Replaces HP part numbers 798033-001, 834931-001, T0E50AA for drop-in upgrades
المواصفات
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
أسئلة حول هذا المنتج
How do I install this DDR4 DIMM and which step do people often miss?
Align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify the system recognises the full 4GB at 2133MHz in BIOS.
What maintenance or replacement will this 4GB DDR4 2133MHz CL15 module need later?
No routine maintenance is required; keep the contacts dust-free and replace the stick only if memory errors appear or a capacity upgrade is desired.
What limit appears first when this 1.2V unbuffered DIMM runs under sustained load?
The CL15 latency at 2133MHz sets the throughput ceiling before voltage or thermal constraints become a factor.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
