نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green DDR4 server DIMM 288 pin 4GB module

A-Tech

A-Tech 4GB DDR4 2400 ECC RDIMM 1Rx8 CL17 1.2V Server Memory

SKU CH-JZ93-BAZPC

4GB DDR4 2400 ECC registered DIMM with CL17 latency and 1.2V operation for server upgrades

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load on the memory controller
  • 2400 MHz DDR4 speed delivers 19200 MB/s bandwidth
  • 2 V operation lowers power draw and heat
  • 288-pin DIMM fits standard DDR4 server slots

4GB DDR4 2400 ECC RDIMM for Servers

This 4GB registered ECC module targets administrators upgrading or repairing DDR4 server and workstation platforms. It delivers 2400 MHz speed with CL17 latency at the standard 1.20V operating voltage. The 1Rx8 organisation uses major-brand chips on a 288-pin DIMM. It serves environments that require error correction and registered signalling for stable operation.

Straightforward DIMM Installation

Insert the module into a compatible DDR4 RDIMM slot until the retention clips engage; the key notch prevents incorrect orientation. No extra cables, drivers or firmware steps are required. The main risk is mixing registered ECC DIMMs with unbuffered or non-ECC memory, which prevents the system from posting. Always confirm the platform supports registered ECC before purchasing.

4GB Capacity for Light Workloads

The single 4GB rank handles basic virtualisation hosts, entry-level database nodes and memory-limited legacy applications. Headroom disappears quickly with multiple VMs, large in-memory caches or modern container orchestration. Systems needing more than a few gigabytes per channel will require higher-density modules or additional populated slots.

أبرز المميزات

  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load on the memory controller
  • 2400 MHz DDR4 speed delivers 19200 MB/s bandwidth
  • 2 V operation lowers power draw and heat
  • 288-pin DIMM fits standard DDR4 server slots

المواصفات

BrandA-Tech
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

أسئلة حول هذا المنتج

How can I confirm the 4GB DDR4 2400 ECC RDIMM is running at CL17 1.2V after installation?

Enter the BIOS or use a tool like CPU-Z to verify the module reports 2400 MT/s, CAS latency 17 and 1.2 V operation.

What is included with the 4GB DDR4 2400 ECC RDIMM and what must be purchased separately?

The box contains one 288-pin 4GB registered ECC DIMM; no cables, brackets or additional memory modules are supplied.

Which version of the 4GB DDR4 2400 ECC RDIMM should I choose for a system that requires Micron MTA9ASF51272PZ-2G3 compatibility?

This module is built as a direct replacement for Micron part numbers MTA9ASF51272PZ-2G3, MTA9ASF51272PZ-2G3A2 and MTA9ASF51272PZ-2G3B1.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.