نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR4 2400MHz PC4-19200 Desktop RAM

SKU CH-YNAJ-NEZ9Z

4GB DDR4 2400MHz desktop memory module, 288-pin unbuffered DIMM at 1.2V for AMD and Intel systems

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 4GB capacity adds headroom for everyday multitasking
  • DDR4 2400MHz speed keeps data moving at PC4-19200 rates
  • 20V operation matches standard DDR4 voltage for broad compatibility
  • 288-pin DIMM fits common desktop memory slots
  • Tested replacement for Hynix 851 series modules ensures drop-in fit

4GB DDR4 2400MHz Desktop Module

This A-Tech module provides four gigabytes of DDR4 memory at 2400MHz. It uses the standard 1.20V operating voltage and an unbuffered, non-ECC design. The 288-pin DIMM form factor fits typical desktop motherboard slots. It is built as a direct replacement for specific Hynix part numbers.

Suits owners of compatible desktops needing

Builders who want to add a modest amount of capacity to a supported platform will find this module appropriate. It works with both AMD and Intel systems that accept DDR4 2400MHz UDIMMs. Buyers who need more than four gigabytes of total memory should look at higher-capacity kits. Systems requiring ECC or registered memory cannot use this stick.

Fits a standard 288-pin DDR4 slot on a desktop board

The module draws 1.20V, matching the DDR4 baseline, so no extra voltage headroom is required. Its single-rank 1Rx16 organisation leaves other slots free for future expansion. No special cooling or BIOS tuning is mentioned, so it installs like any ordinary UDIMM. Verify your motherboard's supported speeds and maximum capacity before purchasing.

أبرز المميزات

  • 4GB capacity adds headroom for everyday multitasking
  • DDR4 2400MHz speed keeps data moving at PC4-19200 rates
  • 20V operation matches standard DDR4 voltage for broad compatibility
  • 288-pin DIMM fits common desktop memory slots
  • Tested replacement for Hynix 851 series modules ensures drop-in fit

المواصفات

BrandA-Tech
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

أسئلة حول هذا المنتج

Will this 4 GB DDR4 2400 MHz module fit a standard desktop DIMM slot?

Yes, it uses the 288-pin DDR4 DIMM form factor that matches standard desktop memory slots.

Does this module require any special voltage setting in the BIOS?

No, it operates at the standard DDR4 voltage of 1.20 V, which is the default for DDR4 platforms.

Can I use this stick to replace a Hynix HMA851U6AFR6N-UH module?

Yes, the supplier lists this A-Tech module as a direct replacement for that Hynix part number and the two other Hynix part numbers shown.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.