OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
4GB DDR4 2933MHz desktop DIMM module rated CL21 at 1.2V for Hynix HMA851U6DJR6N-WM replacement
This A-Tech module is a direct replacement for the Hynix HMA851U6DJR6N-WM stick. It adds 4GB of DDR4 memory to a desktop system using a standard 288-pin DIMM slot. The upgrade targets users who need to restore or expand capacity in a compatible platform.
The module runs at DDR4 2933 (PC4-23400) with a CAS latency of 21 and the standard 1.20V operating voltage. It is an unbuffered, non-ECC UDIMM built with a major-brand chipset in a 1Rx16 organisation. Your motherboard must support this exact speed, voltage and latency profile for the stick to operate as specified.
The package contains only the bare memory module; there is no heat spreader, no additional cables and no software utility. Installation is a simple mechanical insertion into a free DIMM slot, after which the system firmware configures the timing automatically.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMA851U6DJR6N-WM |
| Capacity | 4GB |
| Speed | DDR4 2933 (PC4 23400) |
| Tested Frequency | 2933 |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | HMA851U6DJR6N-WM |
| Recommend Use | Compatible Replacement for Hynix HMA851U6DJR6N-WM |
The module runs at 2933 MT/s, giving a PC4-23400 bandwidth rating; real-world throughput depends on the platform's memory controller and current workload.
DDR4 2933 MT/s with CL21 latency caps the maximum data rate at the PC4-23400 level; the system cannot exceed this without overclocking or faster modules.
It requires a standard 288-pin DDR4 DIMM slot and has no heat spreader, so it fits low-profile spaces.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟