نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Four green 288-pin DDR4 LRDIMM modules in anti-static tray

A-Tech

A-Tech 512GB (4x128GB) DDR4 2933 ECC LRDIMM 4Rx4 server RAM

SKU CH-BEKQ-NZ9TY

A 512 GB quad-channel kit of four 128 GB DDR4 2933 ECC LRDIMM modules for servers and workstations

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 512GB (4 x 128GB)

  • 512GB total capacity across four 128GB modules for high-density server workloads
  • DDR4 2933 speed with CL21 latency delivers fast data throughput for demanding applications
  • ECC Load Reduced DIMM technology corrects errors while reducing electrical load on the memory bus
  • 288-pin DDR4 form factor at standard 1.2V voltage for compatible server and workstation platforms
  • Quad-rank 4Rx4 organisation maximises memory density per channel in supported systems

512 GB quad-channel DDR4 LRDIMM kit

This kit provides 512 GB of DDR4 2933 ECC load-reduced memory in four 128 GB modules. It is built for servers and workstations that require registered LRDIMM modules with 4Rx4 organisation. The quad-channel configuration allows maximum bandwidth on platforms that support four memory channels per processor. Desktop and laptop systems cannot use these modules.

Load-reduced design and ECC

The load-reduced architecture reduces electrical load on the memory bus so that higher-capacity modules can run at 2933 MHz without signal degradation. ECC detects and corrects single-bit errors, protecting data integrity in critical workloads. Each module operates at the standard 1.2 V DDR4 voltage and carries a CAS latency of CL21. No heat spreaders are fitted, so airflow in the chassis must be sufficient for bare modules.

Verify platform support for DDR4 LRDIMM

Confirm that your motherboard and processor officially support DDR4 2933 LRDIMM modules in a 4Rx4 quad-rank configuration. Check the system manual for approved memory population rules, maximum capacity per slot and channel, and any BIOS version requirements. Ensure the board has four available 288-pin DIMM slots wired for quad-channel operation before ordering.

أبرز المميزات

  • 512GB total capacity across four 128GB modules for high-density server workloads
  • DDR4 2933 speed with CL21 latency delivers fast data throughput for demanding applications
  • ECC Load Reduced DIMM technology corrects errors while reducing electrical load on the memory bus
  • 288-pin DDR4 form factor at standard 1.2V voltage for compatible server and workstation platforms
  • Quad-rank 4Rx4 organisation maximises memory density per channel in supported systems

المواصفات

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 512GB (4x128GB) 4Rx4 PC4-2933Y-L
Part NumberNE-SS-0714
Capacity512GB (4 x 128GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4 / 4DRx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I replace a failed module in the 4x128GB kit?

Each module is a 288-pin DDR4 LRDIMM; remove the faulty stick and insert a matching 128GB 4Rx4 PC4-23400L unit in the same slot, following the server's channel guidelines.

What limits sustained throughput on these 2933 MHz LRDIMMs?

The CL21 latency at 1.20V and the quad-rank 4Rx4 organisation set the practical bandwidth ceiling during continuous workloads.

How much heat and power do four 128GB LRDIMMs generate running all day?

The kit operates at the standard 1.2V DDR4 voltage with no heat spreaders, so thermal output and power draw follow the platform's memory-subsystem design for load-reduced modules.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.