OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
64 GB DDR4 2666 ECC load-reduced DIMM with 4Rx4 organisation and CL19 latency for high-density server memory slots
This 64GB module targets server and workstation platforms that require registered ECC memory. It operates at DDR4 2666 speed with CL19 latency and 1.20V voltage. The load-reduced design places less electrical load on the memory controller than standard registered DIMMs. Buyers needing non-ECC or unbuffered memory for consumer boards cannot use this module.
The stick uses the 288-pin DDR4 DIMM form factor and requires a motherboard slot wired for DDR4 LRDIMM signalling. Because it is load-reduced, it frees the memory controller to populate more slots per channel than a standard registered DIMM of the same rank. Systems that only accept UDIMM or RDIMM modules will not recognise this part.
A single module delivers 64GB using a 4Rx4 Samsung chipset arrangement, giving high density for virtualisation or large dataset workloads. The four-rank layout maximises capacity per slot but may limit the maximum number of modules per channel on some platforms. Workloads exceeding the module count supported by the memory controller will require a different rank configuration.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M386A8K40BM2-CTD7Q, M386A8K40BM2-CTD7Y |
| Capacity | 64GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Samsung Chipset |
| Features | M386A8K40BM2-CTD7Q, M386A8K40BM2-CTD7Y |
The module operates at CL19, which is the primary timing parameter that affects latency during continuous operation.
At the standard DDR4 voltage of 1.20 V the module runs within the normal thermal envelope for load-reduced server memory; no additional cooling beyond typical chassis airflow is required.
The module is a compatible replacement for Samsung M386A8K40BM2-CTD7Q and M386A8K40BM2-CTD7Y, so any system qualified for those part numbers will accept it.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟