نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 240-pin DDR3 DIMM with silver heatsink and black chips

A-Tech

A-Tech 8GB DDR3 1333MHz ECC RDIMM 2Rx4 1.5V Server Memory

SKU CH-5SY5-XE9YK

An 8 GB DDR3 1333 MHz ECC registered DIMM with 2Rx4 organisation and 1.5 V operation for server upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3 1333MHz speed delivers PC3-10600 bandwidth for responsive data access
  • ECC RDIMM design detects and corrects single-bit errors automatically
  • Registered 2Rx4 organisation reduces electrical load on the memory controller
  • 5V standard voltage ensures broad platform compatibility

A-Tech 8GB DDR3 1333MHz ECC RDIMM

This A-Tech module is an 8GB DDR3 1333MHz ECC registered DIMM built for server and workstation systems. It runs at the standard 1.5V voltage with CL9 latency and a 2Rx4 rank configuration using major brand chips. The 240-pin form factor fits DDR3 registered memory slots.

Suited for registered ECC platforms only

This memory suits administrators upgrading or repairing servers that require registered ECC DDR3 modules. It will not work in platforms that only accept unbuffered non-ECC memory. Builders needing higher capacities, different speeds or consumer desktop memory should look elsewhere.

Registered ECC DDR3 decides compatibility

The single specification that decides fit is the registered ECC DDR3 1333MHz 2Rx4 1.5V 240-pin profile. Your system documentation must list support for this exact registered ECC DDR3 configuration before purchase.

أبرز المميزات

  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3 1333MHz speed delivers PC3-10600 bandwidth for responsive data access
  • ECC RDIMM design detects and corrects single-bit errors automatically
  • Registered 2Rx4 organisation reduces electrical load on the memory controller
  • 5V standard voltage ensures broad platform compatibility

المواصفات

BrandA-Tech
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

أسئلة حول هذا المنتج

How much power does the 1.5V DDR3 module draw when the server runs continuously?

The module operates at the standard DDR3 voltage of 1.5V, which keeps power draw predictable for 24/7 server workloads.

What motherboard slot is required to install this 240-pin DDR3 RDIMM?

A DDR3 DIMM slot with 240 pins that supports registered ECC memory is required for this module to function.

Will this 1333MHz CL9 registered DIMM work alongside slower DDR3 modules already in my system?

The module runs at DDR3 1333MHz with CL9 timing; the system will clock all installed memory to the speed of the slowest module present.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.