EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
8GB DDR3 1600 ECC registered DIMM with 2Rx4 organisation and CL11 latency for compatible HP servers
This 8 GB DDR3 1600 ECC registered DIMM is built for HP server and workstation platforms that require registered error-correcting memory. It suits administrators upgrading capacity in compatible HP systems where 2Rx4 organisation and CL11 timing are specified. The module uses major-brand chips and operates at the standard 1.5 V DDR3 voltage.
Installation follows the standard 240-pin DIMM procedure: power down, open the chassis, align the notch, and press firmly until the retention clips lock. Registered DIMMs must be populated according to the system's memory population rules; mixing registered and unbuffered modules or exceeding the maximum rank count per channel will prevent the server from posting.
Verify that your HP system lists one of the supported part numbers such as 647651-08M, 647651-571, 682414-001, 689911-071, 689911-171, 690802-B21, 690802-S21, 695793-B21, 698807-001 or 698808-001 in its qualified vendor list. Confirm the platform accepts DDR3 1600 registered ECC memory in a 2Rx4 configuration and that the total installed capacity will not exceed the model's supported limit.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Enter the server BIOS or UEFI on boot and verify the memory information shows 8GB capacity, 1600MHz speed, CL11 latency, 1.5V voltage, registered ECC type and 2Rx4 organisation.
The package contains one 8GB DDR3 1600MHz PC3-12800 ECC registered 240-pin DIMM rated CL11 at 1.5V with 2Rx4 organisation. No cables, brackets or additional components are supplied.
This listing provides a single 8GB 2Rx4 registered ECC DDR3 1600 module; select it when your system requires one 8GB stick with that exact rank and voltage.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟