eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
8GB DDR3 1600MHz ECC registered DIMM with 1Rx4 layout and 1.5V operation for Samsung server upgrades
This 8GB DDR3 1600MHz ECC RDIMM is a registered server memory module built for systems that require error-correcting code. It operates at 1.50V with a CAS latency of CL11 and uses a 1Rx4 rank configuration on major brand chips. The 240-pin DIMM is designed as a compatible replacement for specific Samsung part numbers including M392B1G70BH0-CK0 and M393B1G70BH0-CK0.
This module suits administrators upgrading or repairing servers and workstations that explicitly support DDR3 registered ECC memory. It is not for standard desktop or laptop motherboards that accept only unbuffered non-ECC DIMMs, nor for systems limited to lower densities or different voltage requirements. Buyers needing unbuffered memory or higher capacities per slot should look elsewhere.
Before ordering, confirm your system's motherboard or server manual lists support for DDR3 1600MHz registered ECC RDIMMs at 1.50V. Check that the memory controller accepts 1Rx4 organisation and that free 240-pin DIMM slots are available. Ensure the maximum supported capacity per slot and total system limit accommodate this 8GB module.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module fits a standard DDR3 240-pin DIMM slot on a server or workstation motherboard that supports registered ECC memory at 1.5V.
No, registered and unbuffered DDR3 cannot be mixed; the motherboard must support registered ECC modules for this 1Rx4 stick to function.
Check the BIOS memory information or use a tool like dmidecode to verify speed shows 1600 MT/s, type shows DDR3, and error correction shows ECC enabled.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟