نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 288-pin DDR4 UDIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2133 ECC UDIMM 2Rx8 Server RAM

SKU CH-WGB2-Y5W8X

8GB DDR4 2133MHz ECC unbuffered UDIMM with 2Rx8 organisation and 1.2V operation

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection prevents data corruption with built-in error correction
  • 2133 MHz DDR4 speed delivers responsive server performance
  • 20 V standard voltage reduces power consumption
  • 2Rx8 dual-rank organisation increases memory density
  • 288-pin UDIMM form factor fits compatible server slots

8GB DDR4 ECC UDIMM for Server Upgrades

This 8GB DDR4 2133MHz ECC unbuffered DIMM is built as a compatible replacement for Micron MTA18ASF1G72AZ-2G1A1 and MTA18ASF1G72AZ-2G1B1 modules. It targets administrators upgrading or repairing server and workstation platforms that require error-correcting memory at standard voltage. The 2Rx8 organisation and 288-pin form factor match the original Micron specification. Systems needing registered or load-reduced DIMMs cannot use this module.

Capacity and headroom at DDR4 2133

The single 8GB rank provides 8GB of addressable capacity per slot with CL15 latency at the PC4-17000 data rate. It handles typical virtualisation workloads, database buffers and multi-user application tiers within that footprint. Workloads that exceed 8GB per channel or demand higher bandwidth than 2133MT/s will saturate the module. The 2Rx8 layout offers standard density for dual-channel population.

Thermals noise and power at 1.20V

Operating at the DDR4 standard 1.20V, the unbuffered module draws minimal power and generates low heat inside chassis with directed airflow. No active cooling is required on the DIMM itself. Silent operation is inherent because the module has no moving parts. Power draw scales with utilisation but remains within the standard DDR4 envelope for this density and speed.

أبرز المميزات

  • ECC protection prevents data corruption with built-in error correction
  • 2133 MHz DDR4 speed delivers responsive server performance
  • 20 V standard voltage reduces power consumption
  • 2Rx8 dual-rank organisation increases memory density
  • 288-pin UDIMM form factor fits compatible server slots

المواصفات

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA18ASF1G72AZ-2G1A1, MTA18ASF1G72AZ-2G1B1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMTA18ASF1G72AZ-2G1A1, MTA18ASF1G72AZ-2G1B1

أسئلة حول هذا المنتج

Will this DDR4 2133 CL15 ECC UDIMM run at 2133 MHz when installed next to DDR4 2133 modules I already own?

Yes, identical speed and latency ratings mean the modules will operate together at DDR4 2133 without forcing a lower frequency.

How can I confirm the module is running as ECC unbuffered at CL15 after installation?

Check the BIOS memory information or a tool like CPU-Z; it should report 8 GB, DDR4 2133, CL15, 1.20 V and ECC unbuffered.

Does the 288-pin DIMM arrive alone, or are extra parts such as a heatsink or cable included?

The box contains the single 8 GB 2Rx8 DDR4 2133 ECC UDIMM only; no heatsink, cable or additional hardware is supplied.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.