نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Single green 288-pin DDR4 DIMM with black chips and a white label

A-Tech

A-Tech 8GB DDR4 3200 CL22 1.20V Desktop RAM

SKU CH-GB3N-CQCCF

An 8 GB DDR4 module running at 3200 MHz with CL22 latency and 1.20 V on a 288-pin DIMM

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • Tested Frequency3200
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • 8GB capacity adds headroom for multitasking
  • 3200MHz DDR4 speed accelerates data throughput
  • CL22 latency keeps timing tight for responsive loads
  • 20V operation reduces power draw and heat
  • 288-pin DIMM fits standard desktop memory slots

8GB DDR4 3200 Module for Desktop Upgrades

This single 8GB DDR4 module runs at 3200 MT/s with a CAS latency of CL22 and operates at the standard 1.20V. It uses a 288-pin unbuffered DIMM form factor and is built with major-brand chips. The kit is validated as a direct replacement for several Crucial part numbers and is intended for desktop systems that support DDR4 memory.

Capacity and Headroom at 8GB and 3200 MT/s

Eight gigabytes provides enough space for everyday multitasking, office applications and light content creation. Memory-intensive workloads such as large video timelines, heavy virtualisation or modern AAA titles at high settings will exceed this capacity and cause paging to storage. The 3200 MT/s data rate delivers solid bandwidth for mainstream CPUs, though platforms that benefit from tighter timings or higher frequencies will see diminishing returns beyond this module's CL22 rating.

Thermals Noise and Power Draw in Normal Use

Operating at the JEDEC-standard 1.20V keeps power consumption low and heat output minimal during typical desktop workloads. The module carries no heatsink, relying on case airflow for passive cooling, which is sufficient for standard operation at stock settings. With no active cooling components, the kit adds zero acoustic noise to the system.

أبرز المميزات

  • 8GB capacity adds headroom for multitasking
  • 3200MHz DDR4 speed accelerates data throughput
  • CL22 latency keeps timing tight for responsive loads
  • 20V operation reduces power draw and heat
  • 288-pin DIMM fits standard desktop memory slots

المواصفات

BrandA-Tech
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
Tested Frequency3200
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

أسئلة حول هذا المنتج

Will this DDR4 3200 CL22 module run alongside my current DDR4 sticks at their rated speeds?

The module operates at DDR4 3200 with CL22 latency and 1.20 V. When mixed with slower DDR4 modules the system will typically downclock all sticks to the lowest common speed and loosest timings, so your existing memory will set the effective frequency.

How can I confirm the stick is running at DDR4 3200 with CL22 timings after installation?

Open Task Manager or a tool such as CPU-Z and check the memory tab; it should report 3200 MT/s and CAS latency 22. The SPD table will also show the PC4-25600 JEDEC profile for this 288-pin DIMM.

What exactly ships in the box and do I need any extra parts to install it?

You receive a single 8 GB DDR4 3200 UDIMM in a protective tray. No cables, brackets or additional components are included or required — just an available 288-pin DIMM slot on your desktop motherboard.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.