نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
White adjustable GPU support bracket with magnetic base and ARGB lighting, height range 67-110mm

AAAwave

AAAwave AURAWAVE GPU Support Bracket 67-110mm White

SKU CH-S9YZ-78MJT

Adjustable 67-110 mm brace stops GPU sag, includes 21 cm ARGB daisy-chain cable and magnetic base for secure mounting

  • Prevents GPU sagging for long-term stability
  • Magnetic base with rubber cushion enables quick, scratch-free mounting
  • Adjustable 67-110mm height fits diverse chassis sizes
  • 21-inch wire allows flexible cable routing
  • ARGB daisy-chain connector synchronises lighting with other components

Prevents GPU Sag

This adjustable bracket supports graphics cards at heights between 67mm and 110mm, stopping the circuit board from bending under its own weight. A magnetic base and rubber pad hold the brace firmly without scratching the chassis. The 21cm lead allows tidy routing inside the case.

ARGB Lighting Sync

A 5V three-pin daisy-chain connector lets the bracket share addressable RGB effects with other compatible components. Builders who want synchronised lighting can link it to a motherboard or controller that provides a standard 5V ARGB header. Systems without such a header will not be able to control the illumination.

Height Range Decides Fit

The single specification that determines suitability is the 67mm to 110mm adjustment span; measure the gap from your motherboard PCIe slot to the side panel before purchasing. If the distance falls outside this window the bracket cannot support the card.

أبرز المميزات

  • Prevents GPU sagging for long-term stability
  • Magnetic base with rubber cushion enables quick, scratch-free mounting
  • Adjustable 67-110mm height fits diverse chassis sizes
  • 21-inch wire allows flexible cable routing
  • ARGB daisy-chain connector synchronises lighting with other components

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Will the 67-110mm adjustable height fit inside my existing mid-tower case alongside the graphics card?

The bracket extends from 67mm to 110mm, so it fits most mid-tower and full-tower chassis; measure the gap between your GPU backplate and the side panel to confirm.

How can I verify the ARGB lighting is synchronised with my motherboard after installing the bracket?

Connect the 5V 3-pin ARGB daisy-chain cable to a compatible motherboard header, then use the board's RGB software to confirm the bracket appears in the lighting chain.

Does the package include mounting screws or only the magnetic base and 21cm wire?

The box contains the adjustable bracket with integrated magnet base, the 21cm ARGB extension wire and a rubber cushion; no separate screws are required because the magnet secures the unit to the case floor.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.