OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
AFRNDK
SHA-256 ASIC miner delivering 82Th/s at 3250W with 34.5 J/TH efficiency, four fans at 76dB, requires 220V input
The AFRNDK Antminer S19 82T is an ASIC mining barebone system built for the SHA-256 algorithm. It targets Bitcoin and compatible currencies with a maximum hashrate of 82Th/s. The unit draws 3250W and requires a 220V input to operate correctly. Four fans manage airflow while producing a noise level of 76dB.
Under continuous operation the miner maintains a power draw of 3250W with a tolerance of ±5%. Its power efficiency sits at 34.5 J/TH within the same ±5% range. The custom Bitmain chip architecture is designed to achieve efficiency as low as 23 J/TH through enhanced circuit design. This balance of hashrate and wattage is intended to support long-term mining stability.
This model replaces earlier Bitmain units such as the Antminer T19, S17pro and T17. The jump is worth it when an operator needs the higher 82Th/s throughput and the improved 34.5 J/TH efficiency over those predecessors. The new generation chip delivers the efficiency gains that justify the hardware change. The 220V power requirement remains a key site constraint.
| Brand | ANTMINER |
|---|---|
| Series | S19 |
| Model | S19 82T |
| Type | Mining Barebone System |
| Crypto Algorithm | SHA 256 |
| Compatible Currency | Bitcoin (BTC) |
| Mining Hardware | ASIC |
| Noise level | 76dB |
| Fan | 4 |
| Power Consumption | 3250W |
The unit produces 76 dB of noise from its four fans, so it needs a dedicated, ventilated area for all-day operation.
It requires a 220 V supply capable of delivering at least 3250 W; lower voltage will damage the hardware.
Each S19 draws up to 3250 W, so the circuit and wiring must handle the combined load of all units running together.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟