نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

ARCTIC COOLING

ARCTIC COOLING MX-4 4G 2019 Edition Thermal Paste 4.0g

SKU CH-NQSC-PZXA6

High-performance thermal compound with 8.5 W/mK conductivity in a 4.0 g syringe for efficient CPU and GPU heat transfer

  • Volume / Net Weight4.0g
  • Thermal Conductivity8.5 W/mK
  • SpecificationsMfr Part Number: MX-4 4G 2019 EDITION/ACTCP00002B
  • FeaturesOptimised Packaging Saves Resources Better than Liquid Metal
  • High thermal conductivity of 8.5 W/mK for efficient heat transfer
  • Easy application with 870 poise viscosity spreads smoothly
  • Safe non-conductive formula eliminates short-circuit risk
  • High durability maintains performance over time
  • Optimised packaging reduces material waste

Thermal paste for CPU and GPU installs

This 4.0 g syringe of ARCTIC MX-4 2019 Edition thermal compound suits DIY builders and system integrators who need reliable heat transfer between a processor and cooler. The paste delivers 8.5 W/mK thermal conductivity and a viscosity of 870 poise for consistent coverage. It is non-conductive with a volume resistivity of 3.8 x 1013 ohm-cm, so accidental contact with components is safe. The 2019 formulation aims for high durability and value for money.

Ideal for standard desktop builds not liquid metal

The compound works well for anyone assembling or servicing air-cooled or all-in-one liquid-cooled systems who prefers a forgiving, non-conductive paste. It is not suited for enthusiasts chasing the absolute lowest temperatures possible with liquid metal, nor for applications requiring electrically conductive thermal interface material. Users who need larger volumes for multiple builds may find the 4.0 g syringe limiting.

Four-gram syringe covers several mainstream sockets

At 4.0 g and a density of 2.5 g/cm3 the tube provides enough paste for multiple CPU or GPU applications on typical desktop platforms. A single application uses a small fraction of the volume, leaving headroom for future reapplies or a second component. The syringe will run out after many installs or if used on oversized cold plates, so high-volume workshops should plan for additional units.

أبرز المميزات

  • High thermal conductivity of 8.5 W/mK for efficient heat transfer
  • Easy application with 870 poise viscosity spreads smoothly
  • Safe non-conductive formula eliminates short-circuit risk
  • High durability maintains performance over time
  • Optimised packaging reduces material waste

المواصفات

ModelAC-MX4
Volume / Net Weight4.0g
Thermal Conductivity8.5 W/mK
SpecificationsMfr Part Number: MX-4 4G 2019 EDITION/ACTCP00002B
FeaturesOptimised Packaging Saves Resources Better than Liquid Metal Easy to Apply Safe Application High Durability Value for Money

أسئلة حول هذا المنتج

What CPU cooler or water block must I already have to use this 4.0 g syringe of MX-4 2019 Edition paste?

Any standard air cooler or water block with a flat cold plate works; the paste is non-conductive and safe for all common mounting hardware.

Will the 8.5 W/mK conductivity and 870 poise viscosity perform reliably on an older CPU with a larger die and uneven IHS?

Yes, the high viscosity fills microscopic gaps on larger or slightly concave dies without pumping out, maintaining stable contact over time.

How can I verify the paste is spreading correctly after I mount the cooler?

Remove the cooler and check for a thin, uniform layer covering the entire IHS with no voids; the grey compound should appear evenly distributed.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.