OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
ASUS
ATX case with curved tempered glass, four pre-installed ARGB fans, 420 mm GPU clearance and 360 mm top radiator support
The ASUS Prime AP304 TG ARGB is a mid-tower chassis finished in black steel, plastic and tempered glass. It accepts ATX, Micro-ATX and Mini-ITX motherboards and comes with four pre-installed ARGB fans that synchronise via Aura Sync. The curved glass panel wraps from front to side for a wide view of internal components.
The front panel provides one USB 3.2 Gen 2x2 Type-C connector, two USB 3.2 Gen 1 ports and a combined headphone and microphone jack. Dust filters sit at the bottom and top of the case to reduce particle ingress. Seven expansion slots support full-length add-in cards.
Graphics cards up to 420 mm long fit inside, while CPU coolers up to 175 mm tall and power supplies up to 200 mm deep are supported. The top panel accommodates radiators up to 360 mm long. Builders who need more than two 3.5-inch or three 2.5-inch drive bays should consider a larger enclosure.
| Brand | ASUS |
|---|---|
| Part Number | PRIME AP304 TG ARGB BLACK |
| Color | Black |
| Case Material | Steel / Plastic / Tempered Glass |
| Motherboard Compatibility | ATX / Micro ATX / Mini ITX |
| Dust Filters | Bottom / Top |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 3 |
| Expansion Slots | 7 |
| Front Ports | 1 x USB 3.2 Gen 2x2 Type C, 2 x USB 3.2 Gen1, 1 x Headphone/Microphone |
| Fan Options | Bottom - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm / Top - 2 x 140mm / Top - 3 x 120mm |
| Radiator Options | Top - Up to 120mm / Top - Up to 140mm / Top - Up to 360mm |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 200 mm |
| Dimensions | 240 x 535 x 450 mm |
| Weight | 11kg |
| وزن الشحنة | 12.00 kg |
| أبعاد الطرد | 540 × 460 × 250 mm |
The AP304 supports graphics cards up to 420mm long, so it fits the card; a smaller case would likely exceed that limit.
You can mount a 360mm radiator in the roof, giving enough surface area for high-wattage CPUs and GPUs in a custom or AIO loop.
The port runs at up to 20Gbps, so large file transfers to external SSDs finish in seconds rather than minutes.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟