OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
ASUS
ATX board for 12th-generation Intel processors with DDR4 memory up to 128 GB, one PCIe 4.0 x16 slot and two M.2 sockets
The ASUS PRIME B660-PLUS D4 is an ATX motherboard built around the Intel B660 chipset and LGA 1700 socket. It supports 12th Generation Core, Pentium and Celeron processors and accepts up to 128GB of DDR4 memory across four slots. Two M.2 sockets and a PCI Express 4.0 x16 slot provide expansion for storage and graphics.
The B660 chipset delivers consistent bandwidth for the single PCI Express 4.0 x16 slot and both M.2 connectors during extended workloads. Four SATA ports and one USB 3.1 port maintain stable data rates without the thermal throttling sometimes seen on smaller boards. The DDR4 memory controller sustains rated speeds across all populated slots.
A heatsink on the B660 chipset dissipates heat without a fan, so the board adds no audible noise to a system. The 24-pin and 8-pin power connectors feed the socket and memory cleanly, and the ATX layout fits standard chassis without special clearance requirements. No I/O shield or extra cables are included in the box.
| Brand | ASUS |
|---|---|
| Model | PRIME B660-PLUS D4 |
| CPU Socket Type | LGA 1700 |
| CPU Type | Core / Pentium / Celeron (12th Gen, LGA1700) |
| Chipset | Intel B660 |
| Memory Standard | DDR4 |
| Maximum Memory Supported | 128GB |
| PCI Express 4.0 x16 | 1 x PCI Express 4.0 x16 |
| PCI Express x16 | 1 |
| PCI Slots | 1 x PCI Slot |
| M.2 | 2 x M.2 |
| RJ45 | 1 x RJ45 |
| DisplayPort | 1 x DisplayPort |
| USB 3.1 | 1 x USB 3.1 |
| Form Factor | ATX |
The board uses standard ATX layout with passive chipset cooling and fan headers for CPU and chassis fans, so noise and heat depend on the cooler and case airflow you pair with it.
You need an LGA 1700 processor, DDR4 memory modules, an ATX power supply with 24-pin and 8-pin CPU connectors, a case that fits ATX, and your own I/O shield since none is included.
The board provides one PCI Express 4.0 x16 slot and one PCI slot for graphics cards, plus SATA ports for drives, so older PCIe and SATA devices will install and function.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟