نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Low-profile PCIe 4.0 x16 card with two QSFP28 ports

ATTO Technology

ATTO Technology FFRM-N412-000 100Gb dual-port network card

SKU CH-B01B-R1AR1 MPN FFRM-N412-000

100Gb dual-port Ethernet SmartNIC with QSFP28 modules, PCIe 4.0 x16 low-profile, macOS, Windows and Linux support for AI, media and datacentre workloads

  • Dual 100GbE ports deliver peak throughput for AI and GPU workloads
  • PCIe 4.0 x16 interface provides high-bandwidth, low-latency connectivity to the host
  • QSFP28 modules included enable immediate 10/25/40/50/100GbE deployment over optical fiber
  • ATTO360 with ExpertAI simplifies tuning, diagnostics and optimization across any topology
  • TAA-compliant, US-built hardware with enterprise-grade reliability for datacenter and cloud environments

ATTO 100Gb dual-port SmartNIC

The ATTO FFRM-N412-000 is a 100Gb dual-port Ethernet SmartNIC designed for datacentre, cloud, AI/ML and media workflows. It delivers up to 100Gb/s throughput per port using QSFP28 modules that are included. The card targets environments where peak performance is critically important.

PCIe 4.0 x16 bandwidth and speed limits

The adapter uses a PCI Express 4.0 x16 electrical and mechanical interface to reach line-rate 100GbE on both ports. Supported Ethernet speeds include 10, 25, 40, 50 and 100GbE. Low-profile form factor fits dense chassis without blocking adjacent slots.

Verify slot, OS and cabling before ordering

Confirm the host system provides a PCIe 4.0 x16 slot and runs macOS, Windows or Linux for driver support. Ensure the network infrastructure uses optical fibre compatible with QSFP28 or QSFP+ transceivers. NVMe over Fabrics target offload is available at 100Gb only.

أبرز المميزات

  • Dual 100GbE ports deliver peak throughput for AI and GPU workloads
  • PCIe 4.0 x16 interface provides high-bandwidth, low-latency connectivity to the host
  • QSFP28 modules included enable immediate 10/25/40/50/100GbE deployment over optical fiber
  • ATTO360 with ExpertAI simplifies tuning, diagnostics and optimization across any topology
  • TAA-compliant, US-built hardware with enterprise-grade reliability for datacenter and cloud environments

المواصفات

BrandATTO
ModelFFRM-N412-000
Part NumberFFRM-N412-000
وزن الشحنة0.16 kg
أبعاد الطرد250 × 184 × 51 mm

أسئلة حول هذا المنتج

Which speed version should I choose for this card?

This model is a single 100GbE version that also runs at 10, 25, 40 and 50GbE; pick it when you need up to 100Gb/s per port.

What does the 100Gb/s headline figure mean once the card is installed?

Each QSFP28 port can sustain up to 100Gb/s throughput with RDMA, TCP/UDP/IP offloads and NVMe over Fabrics target offload for low-latency storage and AI workloads.

What interface standard does the card use and what does it cap in practice?

It uses a PCIe 4.0 x16 slot, providing the electrical bandwidth needed for dual-port 100GbE line-rate performance.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.