AZZA
AZZA PSAZ-650W ARGB 650W power supply
Delivers 650 W through a single +12 V rail with 80 PLUS Bronze efficiency, ARGB-lit 120 mm fan and a full set of fixed cables in a 140 mm deep ATX chassis
- TypeIntel ATX12V
- Maximum Power650 W
- Fans1 x 120mm fan
- Fan LEDARGB
- Main Connector20+4Pin
- +12V RailsSingle
Options ATX 80+ Bronze (650W) ARGB
- ATX 80+ Bronze (650W)
- ATX 80+ Bronze (750W)
- ATX 80+ Bronze (750W) ARGB
- ATX 80+ Bronze (650W) ARGB
- 650 W continuous power from a single +12 V rail
- 80 PLUS Bronze certification reduces waste heat under load
- 120 mm ARGB fan provides addressable lighting and airflow
- Non-modular flat cables keep routing tidy inside compact cases
- Full protection suite includes UVP, OVP, OPP, OCP and SCP
Power for Mid-Range Builds
This 650 W ATX unit delivers a single +12 V rail rated at 48 A, making it suitable for mainstream gaming PCs and workstations. The 80 PLUS Bronze certification confirms efficient AC-to-DC conversion across typical loads. A 120 mm ARGB fan provides cooling with addressable lighting effects. The compact 140 mm depth helps it fit in smaller cases.
Fixed Cabling and Protection Suite
Non-modular design means every cable is permanently attached, so unused leads must be routed or tucked away. The bundle includes a 20+4 pin ATX, an 8-pin EPS, two 6+2 pin PCIe, five SATA, two Molex and a floppy connector. An ARGB header allows motherboard synchronisation. Built-in UVP, OVP, OPP, OCP and SCP safeguards protect components from electrical anomalies.
ARGB Control and Compliance
A dedicated button on the unit cycles lighting modes without software, offering instant visual changes. Flat cable profiles reduce bulk and simplify cable management behind the motherboard tray. The power supply carries FCC, CE, TUV, RoHS and RCM approvals for global safety and environmental compliance. Universal 100–240 V input supports worldwide use without a voltage switch.
أبرز المميزات
- 650 W continuous power from a single +12 V rail
- 80 PLUS Bronze certification reduces waste heat under load
- 120 mm ARGB fan provides addressable lighting and airflow
- Non-modular flat cables keep routing tidy inside compact cases
- Full protection suite includes UVP, OVP, OPP, OCP and SCP
المواصفات
| Brand | AZZA |
|---|---|
| Model | PSAZ-650W ARGB |
| Type | Intel ATX12V |
| Maximum Power | 650 W |
| Fans | 1 x 120mm fan |
| Fan LED | ARGB |
| Main Connector | 20+4Pin |
| +12V Rails | Single |
| PCI-Express Connector | 2 x 6+2-Pin |
| SATA Power Connector | 5 |
| Max PSU Length | 140 mm |
| Modular | Non-Modular |
| Energy-Efficient | 80 PLUS BRONZE Certified |
| Over Voltage Protection | UVP, OVP, OPP, OCP, SCP |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 47 - 63 Hz |
| Input Current | 10A - 5A |
| Output | +3.3V@20A, +5V@20A, +12V@48A, [email protected] , [email protected] |
| Approvals | FCC, CE, TUV, RoHS, RCM |
| Connectors | 1 x 20+4 Pin ATX 1 x 8 (4+4) Pin EPS 2 x 8 (6+2) Pin PCI-E 5 x SATA 2 x Molex 1 x Floppy 1 x ARGB |
| Features | Intel ATX12V 80PLUS Bronze Certified High-Quality Components 2 Year Warranty Universal AC input from 100V-240V / 200V-240V 120mm fan: Quiet operation across a wide range of loads Durable Flat Cables gives you neat and tidy spaces Protection: UVP,OVP,OPP,OCP,SCP Safety: FCC, CE, TUV, RoHS, RCM One Button for switching RGB mode |
| Dimensions | 3.39" x 5.91" x 5.51" |
إصدارات أخرى من هذا الطراز
3 أخرى من الفئة نفسها
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
AZZA PSAZ-750W 750W ATX 80 PLUS Bronze Non-Modular Power Supply
- ATX
- 750 W
AZZA PSAZ-750W 750W ATX 80 PLUS Bronze Non-Modular ARGB Power Supply
- ATX
- 750 W
أسئلة حول هذا المنتج
Will the 140 mm length fit a standard ATX case?
The unit measures 140 mm deep, matching the typical ATX power-supply bay, so it fits most mid-tower and full-tower cases without clearance issues.
Can the two 6+2-pin PCIe connectors power a graphics card that needs two 8-pin plugs?
Yes, each 6+2-pin connector can be used as an 8-pin, giving you two full 8-pin PCIe power feeds for the graphics card.
Does the ARGB lighting need a motherboard header or can it run standalone?
A dedicated ARGB connector is included; plug it into a 5 V addressable RGB header on the motherboard to control colours, or use the onboard button to cycle modes without software.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
OWC 16GB DDR4 3200 CL22 1.2V 260pin SODIMM Alienware M15 R5 R6
- 16GB
- 260-Pin DDR4 Non-EC…
OWC 32GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware Area-51M R2
- 32GB
- 260-Pin DDR4 Non-EC…
OWC 128GB (2x64GB) DDR4 2933 CL21 2Rx4 288-pin 1.2V ECC RDIMM memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR4 ECC RD…






