OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
AZZA
ATX mid-tower case with tempered glass side panel, two pre-installed 120mm ARGB fans, and room for 360mm front and 240mm top radiators
The AZZA ZENO 350 is a black ATX mid-tower case with a tempered-glass side window. It accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards and ships with two 120 mm ARGB fans installed. The shark-inspired front panel adds distinctive styling while maintaining airflow paths.
A bottom-mounted power-supply position keeps cables tidy and lowers the centre of gravity. Seven expansion slots give room for full-length add-in cards up to 320 mm. CPU coolers up to 165 mm tall fit comfortably, and the case provides two 3.5-inch and four 2.5-inch internal drive bays. Top dust filters help reduce intake debris.
The front panel supports three 120 mm or three 140 mm fans and radiators up to 360 mm, while the top mounts two 120 mm or two 140 mm fans with radiators up to 240 mm. A single rear 120 mm exhaust completes the loop. This configuration moves high air volume steadily, helping components maintain stable temperatures during extended workloads rather than short bursts.
| Brand | AZZA |
|---|---|
| Model | ZENO 350 |
| Type | ATX Mid Tower |
| Color | Black |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| Side Panel | with Side Window |
| Dust Filters | Top |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 4 |
| Expansion Slots | 7 |
| Fan Options | Front - 3 x 120mm / Front - 3 x 140mm / Rear - 1 x 120mm / Top - 2 x 120mm / Top - 2 x 140mm |
| Radiator Options | Front - Up to 360mm / Top - Up to 240mm |
| 120mm Fans | 2 |
| Max GPU Length | 320 mm |
| Max CPU Cooler Height | 165 mm |
| Max PSU Length | ATX power supply |
| Dimensions | 475 x 210 x 410 mm |
| Weight | 6 kg / 13.2 lbs |
The case accepts graphics cards up to 320 mm in length, so most full-size cards will install without hitting the front panel or drive cages.
Two 120 mm ARGB fans are included at the front; adding up to three more 120 mm or 140 mm fans at the front, two at the top and one at the rear lets you balance airflow and noise for sustained loads.
A standard ATX power supply is required because the case has no PSU included and the bottom mount accepts any ATX-length unit.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟