نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black full-tower E-ATX case with tempered glass front and side panels, three white 140mm ARGB fans visible

BFKK

BFKK CTE C750 TG ARGB Snow E-ATX Full Tower PC Case

SKU CH-NXY7-AHCE8

E-ATX full tower with rotated 90-degree motherboard layout, three pre-installed 140mm ARGB fans and support for up to 420mm radiators on three sides

  • TypeE-ATX Full Tower Case
  • Centralised CPU layout with 90° rotated motherboard
  • Three 140 mm ARGB fans pre-installed for immediate airflow
  • Dual-chamber design separates PSU, storage and cables
  • Supports 420 mm radiators on front, rear and motherboard side
  • Up to 14 fan mounts across front, bottom, rear, top and side

CTE E-ATX Full Tower

The CTE C750 TG ARGB Snow is a high-end E-ATX full tower chassis built around the CTE form factor for centralised thermal efficiency. It targets enthusiasts who want a showcase platform for custom liquid cooling or dual AIO configurations. The rotated 90-degree motherboard layout places the CPU at the centre of the airflow path for optimised cooling performance.

Multi-Radiator Cooling Support

The case supports up to 420mm AIO radiators at the front, rear and motherboard side of the chassis. Three 140mm CT140 ARGB fans are pre-installed and the design accommodates up to 14 fans in total across front, bottom, rear, top and motherboard side mounts. Multi-directional cooling support and channeled airflow manage thermals for high-wattage components under load.

Dual-Chamber Build Flexibility

A dual-chamber design separates the motherboard from the PSU, storage and cable management in the back panel chamber. Rotating PCI-E slots, removable filters, a pump and reservoir bracket and Velcro straps simplify assembly and cable routing. The layout frees up the main chamber for extensive liquid-cooling hardware while tempered glass front and side panels display the build.

أبرز المميزات

  • Centralised CPU layout with 90° rotated motherboard
  • Three 140 mm ARGB fans pre-installed for immediate airflow
  • Dual-chamber design separates PSU, storage and cables
  • Supports 420 mm radiators on front, rear and motherboard side
  • Up to 14 fan mounts across front, bottom, rear, top and side

المواصفات

TypeE-ATX Full Tower Case

أسئلة حول هذا المنتج

How do I install the motherboard in the rotated 90-degree layout and what step do builders often miss?

Mount the board so the CPU socket sits in the centre of the chassis; the step many miss is aligning the rotated I/O shield before securing the standoffs.

What maintenance will the three pre-installed 140mm CT140 ARGB fans and the removable dust filters need later?

Clean the filters every few months and wipe the fan blades; the fans use standard 140 mm mounting so they can be swapped individually if a bearing fails.

What thermal limit appears first when running a 420 mm AIO under sustained load in this chassis?

The coolant temperature will stabilise once the radiator surface area and the 14-fan airflow capacity reach equilibrium, so the loop delta-T becomes the limiting factor.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.