OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
BGears
ATX 3.1 900W unit with 12VHPWR 16-pin GPU connector and semi-modular flat cables
The BGears b-GoldX 900W is an ATX 3.1 power supply rated for 900W maximum output. It targets builders assembling a high-end desktop that needs a 16-pin 12VHPWR connection for a modern graphics card. The semi-modular design and black flat ribbon cables help keep the interior tidy and airflow clear. Efficiency meets 80+Gold equivalent levels at 20%, 50% and 100% load across 115V to 230V input.
Confirm that your case can accommodate a power supply up to 600mm in length. Check that the motherboard accepts a 20+4Pin main connector and that the CPU power header matches the two supplied P8 (4+4)pin cables. Ensure the graphics card requires the 12VHPWR connector or the two PCIe P8 (6+2)pin leads provided. Count your SATA devices against the five SATA power connectors available.
This unit replaces an older ATX supply that lacks a native 12VHPWR connector or cannot deliver 900W continuously. The upgrade is worthwhile when moving to a GPU that draws up to 600W through the 16-pin connector and needs PCIe 5.1 compliance. It also suits systems that have outgrown a lower-wattage design and now require more PCIe and SATA leads for additional drives or expansion cards.
| Brand | Bluegears |
|---|---|
| Model | b-GoldX 900W |
| Part Number | b-GoldX 900W |
| Type | ATX 3.1 |
| Maximum Power | 900W |
| Fans | 120mm (2000 RPM) |
| Main Connector | 20+4Pin |
| PCI-Express Connector | P16 (12+4)pin 12VHPWR P8 (4+4)pin x 2 PCIe P8 (6+2)pin x 2 Molex 4pin x 3 |
| SATA Power Connector | 5 |
| Max PSU Length | 600mm |
| وزن الشحنة | 1.81 kg |
| أبعاد الطرد | 152 × 152 × 102 mm |
The semi-modular unit ships with a fixed 20+4-pin ATX cable, two 4+4-pin CPU cables, one 12+4-pin 12VHPWR cable, two 6+2-pin PCIe cables, three Molex cables and five SATA cables; no extra cables are required for standard builds.
It is built to ATX 3.1 and PCIe 5.1 specifications, so the 12VHPWR connector can deliver up to 600W to compatible graphics cards.
The supply meets 80+ Gold efficiency targets at 20%, 50% and 100% load across the full 115V to 230V input range, reducing waste heat and electricity cost in real use.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟