OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
An open-source SHA-256 solo miner delivering 1.2 TH/s at 18 W with a BM1370 chip and included PSU
The Bitaxe Gamma 601 is a compact, fully assembled Bitcoin miner built around the BM1370 ASIC chip from the Antminer S21 Pro. It delivers a hash rate of 1.0 to 1.2 TH/s while drawing only 18 W at the wall, achieving an energy efficiency of 15 J/TH. A power supply is included for immediate plug-and-play operation. The device targets independent miners who want to participate directly in the Bitcoin network without hosting fees.
This miner suits individuals who understand solo mining as a lottery with a 3.125 BTC block reward and who accept long periods without income. It is not for operators who require steady daily payouts from a mining pool or who need multi-terahash throughput to cover electricity costs. Buyers seeking rack-mount form factors, remote management interfaces or integrated cooling beyond the factory design should evaluate other hardware.
The single specification that determines whether this unit fits a given setup is its 15 J/TH efficiency at 1.2 TH/s. At 18 W total draw it can run on a standard household circuit, but the low absolute hash rate means profitability hinges entirely on catching a block solo. If the efficiency figure does not match the miner’s electricity rate and risk tolerance, the device will not meet expectations.
| Model | Bitaxe Gamma 601 |
|---|---|
| Crypto Algorithm | SHA-256 |
| Compatible Currency | Bitcoin (BTC) |
| Mining Hardware | BM1370 |
| Hashrate | 1.2TH/S |
| Power Efficiency | 18W |
The miner operates between 1.0 and 1.2 TH/s. Running at 1.0 TH/s draws about 17 W, while 1.2 TH/s uses roughly 18 W. Choose the lower rate for maximum efficiency or the higher rate for a better chance at the 3.125 BTC block reward.
At 1.2 TH/s you are solo mining, so you compete against the entire network alone. The odds of finding a block are very small, but if you do, you receive the full 3.125 BTC reward rather than a pool share.
The unit ships with a plug-and-play power supply rated for the miner’s 18 W peak draw. No extra cables or adapters are required.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟