نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black sparkle brass 90° dual multi-link fitting for 12mm rigid tubing

Bitspower

Bitspower BP-BSE90DML 12mm 90° Dual Multi-Link Adapter Fitting

SKU CH-1791-HQ631 MPN BP-BSE90DML

Connects 12mm rigid tubing at a 90° angle on both ends with a true hi-flow brass design in Black Sparkle

  • TypeFittings
  • Designed for dual multi-link extension on both sides
  • 90° angle enables tight routing with 12mm OD rigid tubing
  • Compatible exclusively with Bitspower Crystal Link hard tubing
  • True Hi-Flow design minimises flow restriction in custom loops
  • Constructed from high-quality brass with Black Sparkle finish

12 mm 90° Dual Multi-Link Adapter

This 12 mm 90° dual multi-link adapter connects two lengths of Bitspower Crystal Link rigid tubing at a right angle. It is built for custom liquid-cooling loops that require a compact directional change between hard-tube runs. The brass body with Black Sparkle finish matches Bitspower's premium fitting range.

Installation and compatibility

The fitting is designed exclusively for Bitspower 12 mm OD rigid tubing; other tubing brands or diameters will not seal correctly. Push each tube end fully into the dual multi-link ports until the internal collet engages, then verify the O-ring seat before pressurising the loop. Misalignment or incomplete insertion are the most common causes of leaks.

Deciding specification

The only specification that determines fit is the 12 mm outer-diameter requirement paired with Bitspower Crystal Link tubing. If your loop uses a different tube size or brand, this adapter cannot be used.

أبرز المميزات

  • Designed for dual multi-link extension on both sides
  • 90° angle enables tight routing with 12mm OD rigid tubing
  • Compatible exclusively with Bitspower Crystal Link hard tubing
  • True Hi-Flow design minimises flow restriction in custom loops
  • Constructed from high-quality brass with Black Sparkle finish

المواصفات

TypeFittings

أسئلة حول هذا المنتج

How can I confirm the 90° angle is seated correctly after installing the BP-BSE90DML with 12mm rigid tubing?

Check that both Crystal Link tube ends sit fully inside the dual multi-link ports and the black sparkle body forms a clean right angle without gaps or stress on the tubing.

What comes in the box with the BP-BSE90DML and what must I purchase separately?

The fitting itself is included; you must buy Bitspower Crystal Link hard tubing separately because the adapter is designed for use with that specific 12mm OD rigid tubing only.

Which version of this adapter should I choose for a dual multi-link 90° turn with 12mm OD rigid tubing?

Select the BP-BSE90DML model in black sparkle; it is the only variant listed for dual multi-link extension on both sides at a 90° angle for 12mm tubing.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.