EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Brute Networks
128 GB DDR4 server memory module running at 3200 MHz with ECC and quad-rank LRDIMM layout for high-capacity slots
This Brute Networks module delivers 128GB of DDR4 server memory in a single LRDIMM package. It is built to match HPE part number P20505-001 for drop-in compatibility with qualified platforms. The 4Rx4 organisation and ECC function target enterprise workloads that demand maximum density per slot. Buyers who need non-ECC or standard UDIMM form factors cannot use this module.
The load-reduced DIMM design reduces electrical load on the memory bus, allowing higher capacities within the standard DDR4 slot. Gold-edge contacts and JEDEC-standard keying ensure reliable seating in compatible HPE server boards. No additional brackets, cables or cooling hardware are required beyond the server's own memory architecture. Systems that do not support LRDIMM or 4Rx4 population rules will not accept this part.
The single figure that determines fit is the 3200MHz PC4-25600 speed rating combined with the 4Rx4 ECC LRDIMM configuration. Your server's memory controller and BIOS must explicitly support this rank structure and data rate at the full 128GB capacity. If the platform caps rank count, voltage or maximum module size below these values, the memory will not operate.
| Brand | HPE |
|---|---|
| Capacity | 128GB |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
This module operates at DDR4-3200MHz, also rated PC4-25600, delivering 128GB of ECC registered memory for compatible server platforms.
It uses a standard 288-pin DDR4 LRDIMM form factor and installs in a server motherboard DIMM slot that supports load-reduced ECC modules.
Power down the server, open the chassis, align the notch with the DIMM slot key, press firmly until the ejector tabs click, then verify the full 128GB is recognised in the BIOS or system firmware.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟