OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Brute Networks
16 GB DDR4-2666 ECC registered RDIMM with CL15 latency and 1.2 V operation for HP-compatible servers
This 16GB DDR4 registered DIMM adds ECC error correction and registered signalling for servers and workstations that need data integrity. The module runs at 2666 MT/s with CL15 latency at 1.20V. It uses a 1Rx4 organisation and major-brand chips. The 288-pin form factor fits standard DDR4 slots. It is sold new with a lifetime warranty.
This module replaces or expands memory in systems qualified for the HP 850880-001 part number. The jump is worth it when existing capacity limits virtual-machine density or forces swapping under load. Brute Networks guarantees 100% compatibility and service-contract preservation because the same major-brand chipsets are used. No BIOS changes are required beyond standard JEDEC detection.
A single 16GB RDIMM comfortably handles typical virtualisation hosts, database buffers and compute nodes that fit within the server's maximum slot count. Headroom runs out when the application working set exceeds total installed memory across all populated channels. At that point the only remedy is adding further modules of the same specification or moving to higher-capacity LRDIMMs if the platform supports them.
| Brand | HP |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
The module uses the standard 288-pin DDR4 RDIMM form factor. It fits any server slot designed for registered DDR4 memory running at 1.2 V.
Align the notch with the slot key, press firmly until both ejector clips click shut, then verify the BIOS reports 2666 MT/s at CL15 and shows ECC active.
DDR4 RDIMMs have no moving parts and rarely fail. Replace only if memory diagnostics report correctable ECC errors rising over time or a slot fails.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟