Brute Networks
Brute Networks 16GB DDR4-2666 ECC UDIMM 2Rx8 1.2V AA335286-BN
16 GB DDR4-2666 ECC UDIMM with 2Rx8 rank and 1.2 V operation for Dell servers
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredUnregistered
- 16 GB DDR4-2666 ECC UDIMM for Dell servers
- 288-pin 2Rx8 unregistered module at 1.2 V
- 100 % Dell AA335286 compatible
- Major-brand Samsung, SK Hynix or Micron chips
- Lifetime guarantee on every module
Dell-Compatible 16GB DDR4-2666 ECC UDIMM
This 16GB DDR4-2666 ECC UDIMM is built for Dell servers and workstations that require error-correcting memory. It matches Dell part number AA335286 and runs at 1.20V with a 2Rx8 rank configuration. The module uses major-brand chips from Samsung, SK Hynix or Micron and is validated for mission-critical infrastructure upgrades.
Simple 288-Pin Installation With Matched Modules
Installation follows the standard 288-pin DDR4 UDIMM procedure and requires no registration or buffering steps. Orders ship with identically matched modules to prevent the mismatched-rank issues that cause boot failures or reduced performance. All units are 100% tested for compatibility before dispatch.
Verify ECC UDIMM Support And Rank Limits
Confirm the target system accepts unregistered ECC UDIMMs and supports 2Rx8 density at DDR4-2666 speed. Check the motherboard manual for maximum capacity per slot and total rank limits per channel. Ensure the platform operates at 1.20V and does not require registered or load-reduced modules.
أبرز المميزات
- 16 GB DDR4-2666 ECC UDIMM for Dell servers
- 288-pin 2Rx8 unregistered module at 1.2 V
- 100 % Dell AA335286 compatible
- Major-brand Samsung, SK Hynix or Micron chips
- Lifetime guarantee on every module
المواصفات
| Brand | Dell |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
أسئلة حول هذا المنتج
How do I confirm the module is running at 2666 MHz with ECC active after installation?
Enter the server BIOS or use a tool such as CPU-Z; the memory tab should show DDR4-2666 speed, 1.20 V voltage and ECC enabled for the 16 GB module.
What comes in the box and do I need any extra brackets or cables?
The package contains the single 288-pin DDR4 UDIMM only; no brackets, cables or additional hardware are required for standard server DIMM slots.
Should I choose the 2Rx8 16 GB version or a different rank and capacity for my Dell system?
Select this 16 GB 2Rx8 module when your Dell platform requires PC4-21300 ECC UDIMM at 1.2 V; match the rank and capacity to the motherboard's qualified vendor list.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



