Brute Networks
Brute Networks 16GB DDR4-2933 1Rx4 Registered ECC server RAM
16 GB registered ECC DDR4-2933 module with 1Rx4 organisation for HPE-compatible servers
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2933 (PC4 23400)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 16 GB DDR4-2933 registered ECC memory for stable server workloads
- 20 V operation reduces power draw in dense configurations
- 1Rx4 single-rank design keeps signal integrity high
- 288-pin DDR4 form factor fits standard server DIMM slots
- HPE P00920-H21 equivalent validated for 100 % compatibility
HPE-compatible 16 GB DDR4-2933 registered ECC module
This 16 GB DDR4-2933 registered ECC module is built for HPE server platforms that require PC4-23400 memory. It operates at 1.2 V and uses a 1Rx4 organisation on a 288-pin DDR4 SDRAM form factor. Major-brand chips from Samsung, SK Hynix or Micron are used throughout. The module is validated as 100 % compatible with the HPE P00920-H21 part number.
Suited for HPE server upgrades needing registered
IT teams maintaining HPE infrastructure that calls for registered ECC memory at 2933 MT/s will find this module a direct fit. It is not intended for desktop boards, workstations that require unbuffered DIMMs, or systems that need speeds beyond DDR4-2933. Buyers who want higher capacities per slot or faster data rates should look elsewhere.
16 GB per module with DDR4-2933 headroom
Each stick delivers 16 GB of registered ECC capacity at the rated 2933 MT/s speed. The single-rank 1Rx4 layout helps keep signal loading low on populated channels. Headroom ends at the DDR4-2933 specification; workloads that demand greater bandwidth per module or densities above 16 GB per DIMM will exceed what this part provides.
أبرز المميزات
- 16 GB DDR4-2933 registered ECC memory for stable server workloads
- 20 V operation reduces power draw in dense configurations
- 1Rx4 single-rank design keeps signal integrity high
- 288-pin DDR4 form factor fits standard server DIMM slots
- HPE P00920-H21 equivalent validated for 100 % compatibility
المواصفات
| Brand | HPE |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
أسئلة حول هذا المنتج
Does my server need a registered DDR4 slot to use this 16GB 288-pin module?
Yes, this is a registered DDR4 DIMM that requires a server motherboard with registered memory support and a 288-pin DDR4 slot.
Can I mix this 1Rx4 2933MHz stick with slower DDR4 modules already installed?
The system will run all modules at the speed of the slowest installed kit; this module is rated for DDR4-2933 at 1.20V.
How can I verify the module is recognised at 2933MHz after installation?
Check the BIOS memory information or an OS tool such as dmidecode to confirm the module shows 2933 MT/s and registered ECC operation.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



