OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Brute Networks
32 GB DDR4-2933 ECC registered RDIMM with 2Rx4 organisation and 1.2 V operation for HPE-compatible servers
This module delivers 32GB of DDR4-2933 ECC registered memory for HPE server platforms. The 2Rx4 organisation and 1.20V operation match the OEM specification for reliable operation in multi-socket systems. It is built for administrators who need guaranteed compatibility without OEM pricing.
The 288-pin RDIMM form factor uses a major-brand chipset from Samsung, SK Hynix or Micron to ensure signal integrity under load. Registered buffering reduces electrical load on the memory controller, allowing dense population across all channels. Standard DDR4 keying prevents insertion into incompatible slots.
Every order ships with identically matched modules so dual- and quad-channel configurations remain balanced. Lifetime warranty coverage protects the investment for the service life of the server. The third-party design maintains the original factory warranty on the host system.
| Brand | HPE |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23466) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
The module runs at DDR4-2933 (PC4-23466) with a 1.20 V supply. Actual throughput depends on the server memory controller, channel population and BIOS settings, so the rated transfer rate is the ceiling.
It uses a standard 288-pin DDR4 RDIMM form factor. The registered design adds a buffer chip, so verify the motherboard supports registered DIMMs and that heatsink or cable clearance around the slot is sufficient.
Power down the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then confirm in BIOS that the registered ECC module is recognised at the correct speed and voltage.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟