Brute Networks
Brute Networks 8GB DDR4-2133 CL15 2Rx8 1.20V Non-ECC UDIMM
8GB DDR4-2133 CL15 2Rx8 1.20V non-ECC UDIMM with major-brand chips, 100% Dell 370-ACEN compatible
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 8GB capacity expands server memory for larger workloads
- DDR4-2133 speed transfers data at 17000 MT/s
- CL15 latency reduces access delay for responsive operation
- 20V voltage lowers power draw and heat output
- 2Rx8 dual-rank organisation increases density per module
Dell-Compatible 8GB DDR4-2133 Module
This 8GB DDR4 UDIMM operates at 2133 MHz with CL15 latency and 1.20V voltage. It uses a 2Rx8 rank configuration on a 288-pin PCB. The module is built with major-brand chips and validated for Dell systems requiring PC4-17000 memory.
Suited for Dell Servers Needing Non-ECC UDIMMs
It fits Dell platforms that accept unregistered, non-ECC DDR4 at this speed and density. Buyers whose systems require registered DIMMs or error-correcting code memory should look at something else. Environments needing capacities beyond 8GB per slot will need different modules.
288-Pin DDR4 UDIMM Form Factor
The 288-pin unregistered DDR4 interface is the single specification that determines physical and electrical compatibility. Only systems designed for this exact pin-out and signalling standard can accept the module.
أبرز المميزات
- 8GB capacity expands server memory for larger workloads
- DDR4-2133 speed transfers data at 17000 MT/s
- CL15 latency reduces access delay for responsive operation
- 20V voltage lowers power draw and heat output
- 2Rx8 dual-rank organisation increases density per module
المواصفات
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
أسئلة حول هذا المنتج
What maximum data rate does the DDR4-2133 PC4-17000 interface deliver?
The DDR4-2133 PC4-17000 interface runs at 2133 MT/s, giving a peak bandwidth of 17000 MB/s.
Does the 288-pin UDIMM fit standard server DIMM slots?
Yes, the 288-pin unbuffered DIMM matches the standard DDR4 UDIMM slot used in compatible Dell servers.
How do I install the module and what step is often missed?
Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then power on and verify 8 GB appears in BIOS.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



