SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 US$
0.00501407BTC
متوفر
Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3 1333 CL9 memory upgrade for HP Elite 8300 SFF
Dual 4 GB DDR3 1333 CL9 kit adds 8 GB to compatible HP Elite 8300 SFF systems
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 8GB dual-channel kit boosts multitasking on HP Elite 8300 SFF
- DDR3 1333 MHz CL9 modules match system specification exactly
- Two 4 GB unbuffered DIMMs fill two of four available slots
- 5 V standard voltage ensures stable operation without extra cooling
- 240-pin non-ECC design fits Elite 8300 SFF and 8300e SFF motherboards
Targeted DDR3 kit for HP Elite 8300 SFF
This 8 GB kit contains two 4 GB unbuffered DIMMs built for the HP Elite 8300 SFF and Elite 8300e SFF. It runs at DDR3 1333 with CL9 timings at 1.5 V and uses major-brand chips without a heat spreader. The modules are non-ECC and dual-rank for straightforward installation.
Suits owners filling two of four slots
Buyers who want to populate two slots in these small-form-factor desktops and leave room for future expansion will find the 2x4 GB layout convenient. Builders who need a single stick, a higher-density module per slot, or ECC registered memory should look elsewhere.
Speed locked to DDR3 1333 (PC3 10600)
The platform specification lists a maximum memory speed of 1333 MHz, so these modules operate at the ceiling the system allows. If the board or processor in your unit is restricted to a lower DDR3 speed, the kit will downclock automatically but cannot exceed the rated 1333 MHz.
أبرز المميزات
- 8GB dual-channel kit boosts multitasking on HP Elite 8300 SFF
- DDR3 1333 MHz CL9 modules match system specification exactly
- Two 4 GB unbuffered DIMMs fill two of four available slots
- 5 V standard voltage ensures stable operation without extra cooling
- 240-pin non-ECC design fits Elite 8300 SFF and 8300e SFF motherboards
المواصفات
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600DIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp/Compaq Elite 8300 Sff/Cm, Elite 8300E Sff |
| Package Content | 2 Memory RAM Sticks |
أسئلة حول هذا المنتج
Does the 1.5V DDR3-1333 kit run hot or draw extra power during long sessions?
Standard 1.5V DDR3 modules operate within normal thermal limits for the Elite 8300 SFF; no additional cooling is required.
What must already be in the Elite 8300 SFF for these 240-pin DIMMs to work?
The system needs a compatible HP Elite 8300 SFF or 8300e SFF motherboard with free DDR3 slots; maximum supported memory is 32GB across four sockets.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
