نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Corn Electronics

Corn Electronics 180 Degree 8-Pin GPU Power Adapter video card accessory

SKU CH-S7FS-6WCVV

An 180-degree 8-pin GPU power adapter that reroutes cables horizontally for tight chassis and cleaner cable management

Color Black

Style STD

Angle 180 Degree

  • 180-degree turn lowers cable height for tight chassis
  • horizontal routing keeps interior tidy and solves top-cover clearance
  • thickened copper and solid pins deliver stable power transmission
  • plastic shell prevents short circuits during operation
  • fits any graphics card with a PCIe 8-pin connector

Tight-space 8-pin GPU power adapter

The Corn Electronics 180 Degree adapter re-routes a standard PCIe 8-pin power cable from vertical to horizontal, lowering the connector profile inside compact cases. It is built for builders who cannot close a side panel because a straight plug hits the glass or a drive cage. The right-angle turn keeps the cable flush against the card, reducing strain on the socket.

Replaces a straight 8-pin plug in cramped builds

Swap to this adapter when the graphics card sits too close to the case wall or a radiator for a straight connector to fit without sharp bends. The 180-degree turn eliminates the vertical clearance needed by stock cables, letting you route power cleanly along the PCB. It is not for systems where the existing straight plug already seats with ample room.

Verify 8-pin PCIe port and cable reach

Confirm the graphics card and power supply both use an 8-pin PCIe interface before ordering. Measure the distance from the card's power socket to the nearest obstruction to ensure the horizontal tail clears it. Check that the PSU cable length still reaches the new connector position without tension.

أبرز المميزات

  • 180-degree turn lowers cable height for tight chassis
  • horizontal routing keeps interior tidy and solves top-cover clearance
  • thickened copper and solid pins deliver stable power transmission
  • plastic shell prevents short circuits during operation
  • fits any graphics card with a PCIe 8-pin connector

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the 180-degree turn on this adapter need extra clearance above the graphics card?

The 180-degree turn re-routes the 8-pin cable from vertical to horizontal, lowering the profile so it fits under a graphics card top cover or tight side panel without extra height.

Which way round do I plug the male and female ends when installing this PCIe 8-pin adapter?

Connect the male end into the graphics card's 8-pin socket first, then attach your PSU cable to the female end; reversing them leaves the turn pointing the wrong way.

Will the thickened copper contacts and solid pins on this adapter wear out and need replacing?

The multi-layer board with thickened copper and firmly welded solid pins is rated for continuous use and does not have a scheduled replacement interval.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.