OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Corn Electronics
Yellow aluminium mini-tower holds ITX or MATX boards, SFX power, 310 mm graphics cards, 130 mm coolers, four 2.5″ drives and dual 120 mm or triple 90 mm fans in 315×155×265 mm at 8.62 kg
The Corn Electronics C26 is a 315 x 155 x 265 mm aluminium case finished in yellow. It accepts ITX or MATX motherboards and weighs 8.62 kg. Front I/O provides a USB 3.0 port and a Type-C connector. Dust filters are included to help keep internals clean.
This chassis replaces larger towers that require ATX power supplies. It mounts SFX or SFX-L units at the top, with SFX preferred. Radiator options include two 120 mm units, two 90 mm units or a single 90 mm unit. Builders who need ATX power or more than two 120 mm radiators should look elsewhere.
A side-opening tempered-glass panel gives direct access to components. Maximum graphics-card length is 310 mm and CPU-cooler height is 130 mm, with a 133 mm height limit noted for the graphics area. Storage bays support two 2.5-inch SSDs and either two 3.5-inch HDDs or four 2.5-inch SSDs.
| Motherboard Compatibility | ITX/MATX |
|---|---|
| Power Supply Mounted | Top |
| Color | Yellow |
| Case Material | Aluminum |
| Type | ITX/MATX |
| Power Supply | No |
| With Power Supply | No |
| Side Panel | with Side Window |
| LED | No |
| Dust Filters | Yes |
| Front Ports | USB 3.0 |
| Brand | CORN |
| Model | C26 |
| Radiator Options | 120*120mm x 2; 90*90mm x2; 90*90mm*1 |
| Max GPU Length | 310mm |
| Max CPU Cooler Height | 130mm |
| Max PSU Length | SFX |
| Dimensions | 315*155*265mm |
| Weight | 8.62kg |
The chassis fits graphics cards up to 310 mm long and CPU coolers up to 130 mm tall, so measure your parts against those limits before buying.
Fit the ITX or MATX standoffs that match your board, then secure the centre screw before the corners to keep the I/O shield seated.
The magnetic filters on the front and bottom panels pull off without tools; clean them every few months depending on room dust levels.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟