OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Corn Electronics
White mid-tower case fits ATX, Micro-ATX and Mini-ITX boards, supports graphics cards up to 300 mm long and CPU coolers up to 155 mm tall.
This compact mid-tower fits ATX, Micro-ATX and Mini-ITX motherboards and is finished in white 0.35 SPCC steel with an acrylic side window. It provides seven expansion slots, two 3.5-inch bays and two 2.5-inch bays for storage. Front I/O includes two USB 2.0 ports, one USB 3.0 port and HD Audio.
The chassis accepts up to six 120 mm fans in fixed positions: three at the front, two at the top and one at the rear. Radiator support follows the same 120 mm grid, allowing 120 mm, 240 mm or 360 mm units where fan mounts exist. No larger fan sizes or alternative radiator lengths are supported by the case structure.
The maximum graphics card length is 300 mm, so cards longer than this will not fit regardless of other clearances. The CPU cooler height limit is 155 mm, restricting the choice of tower coolers. Builders needing longer GPUs or taller coolers must select a different chassis.
| Brand | CORN |
|---|---|
| Type | ATX Mid Tower |
| Case Material | 0.35 SPCC+Acrylic |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX |
| Side Panel | with Side Window |
| Dust Filters | Yes |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| Front Ports | USB2.0*2+USB3.0*1+HD Audio |
| Fan Options | Front:120*3/Top:120*2/Rear:120*1 |
| Radiator Options | 360/240/120 |
| Max GPU Length | 300 mm |
| Max CPU Cooler Height | 155 mm |
This single model fits ATX, Micro-ATX and Mini-ITX boards, accepts GPUs up to 300 mm long and CPU coolers up to 155 mm tall, so it covers the stated compatibility range in one SKU.
A 300 mm card will fit with room for front-mounted fans or a 360 mm radiator; longer cards would hit the front panel or fan brackets.
The front I/O includes one USB 3.0 port and two USB 2.0 ports; the 3.0 port runs at its rated 5 Gbps when connected to a matching motherboard header.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟