BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Corsair
32 GB dual-channel DDR5 kit at 6400 MT/s CL32 with onboard voltage regulation and Intel XMP 3.0 profiles for stable high-performance overclocking
This Corsair Dominator Platinum RGB kit delivers 32GB of DDR5 memory across two 16GB modules. It is built for high-performance desktop systems and gaming rigs that need fast, responsive memory. The dual-channel configuration suits modern multi-core processors on AMD and Intel platforms.
The modules run at DDR5 6400 with a CAS latency of CL32 and timings of 32-40-40-84 at 1.40V. Intel XMP 3.0 profiles let you enable the rated speed with a single BIOS setting. This combination of frequency and latency determines whether the kit matches your CPU and motherboard capabilities.
The low-clearance 288-pin design fits comfortably under most CPU coolers and inside compact cases. Onboard voltage regulation works through Corsair iCUE software for stable tuning without motherboard-only control. The kit supports Intel 500 and 600 series chipsets including Z590, Z690, B660 and newer Z790 boards.
| Brand | CORSAIR |
|---|---|
| Series | Dominator Platinum RGB |
| Model | CMT32GX5M2B6400C32 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-40-40-84 |
| Voltage | 1.40V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Recommend Use | AMD & Intel Compatible / High Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel B660 / Intel Compatible / Intel Z590 / Intel Z690 |
| وزن الشحنة | 0.25 kg |
| أبعاد الطرد | 163 × 160 × 18 mm |
Yes, the kit is validated for Intel 600 Series and Z690 chipsets with 13th Gen Intel CPUs and uses an Intel XMP 3.0 profile to reach 6400 MT/s at CL32.
The Intel XMP 3.0 profile sets the 1.40 V automatically when enabled in the BIOS, so no manual voltage adjustment is required.
The compact form-factor is designed for wide compatibility with nearly any DDR5 build, including setups with bulky air coolers.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟