نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 120mm PWM case fan with translucent blades and RGB LED ring around hub

Corsair

Corsair iCUE SP120 RGB ELITE 120mm PWM case fan CO-9050108-WW

SKU CH-6Z2B-G3NW9 MPN CO-9050108-WW

A 120mm PWM case fan with eight individually addressable RGB LEDs, AirGuide anti-vortex vanes, and a hydraulic bearing spinning at 550 to 1500 RPM for up to 47.73 CFM airflow at 26.5 dBA

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm

Fan Size 120mm

Option 1 Pack

  • AirGuide anti-vortex vanes concentrate airflow for focused cooling
  • Eight individually addressable RGB LEDs create vivid lighting effects
  • PWM control up to 1500 RPM delivers 47.73 CFM airflow
  • Hydraulic bearing runs as quietly as 18 dBA at low speed
  • Translucent blades let RGB shine through while moving air

Single 120mm PWM fan with AirGuide

The Corsair iCUE SP120 RGB ELITE is a single 120mm case fan built around AirGuide anti-vortex vanes that concentrate airflow for intake, exhaust or radiator mounting. It spins from 550 to 1500 RPM, delivering 16.91 to 47.73 CFM at 1.46mm-H2O static pressure. Eight individually addressable RGB LEDs encircle the hub and shine through translucent blades. A hydraulic bearing keeps noise between 18 and 26.5 dBA. The fan connects via a standard 4-pin PWM header and requires a separate CORSAIR Digital Lighting Controller for iCUE software control.

Builders adding RGB airflow to an iCUE loop

This unit suits anyone expanding an existing iCUE SP RGB ELITE setup or building a new loop with a compatible lighting controller already on hand. It works as a case intake, exhaust or radiator fan thanks to the focused airflow design. Buyers who want a plug-and-play RGB fan without purchasing a separate lighting controller should look elsewhere. Systems without a 4-pin PWM header or without space for a 25mm thick 120mm frame cannot use this fan.

Straightforward screw mounting

Installation uses the four supplied screws into standard 120mm mounting holes and a single 4-pin PWM connection to the motherboard or fan hub. The RGB cable must reach a CORSAIR Digital Lighting Controller, which is not included; forgetting that extra hardware is the most common reason the lighting stays dark. Cable routing can be tight in compact cases because the fan and lighting leads run separately. Once powered, iCUE detects the fan automatically for speed curves and lighting sync.

أبرز المميزات

  • AirGuide anti-vortex vanes concentrate airflow for focused cooling
  • Eight individually addressable RGB LEDs create vivid lighting effects
  • PWM control up to 1500 RPM delivers 47.73 CFM airflow
  • Hydraulic bearing runs as quietly as 18 dBA at low speed
  • Translucent blades let RGB shine through while moving air

المواصفات

BrandCorsair
SeriesiCUE SP120 RGB ELITE
ModelCO-9050108-WW
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic
RPM550 - 1500 +/- 10% RPM
Air Flow16.91 - 47.73 CFM
Noise Level18 - 26.5 dBA
Power Connector4 Pin
ColorBlack
LEDRGB
FeaturesCORSAIR AirGuide Technology: Utilizes anti-vortex vanes to direct airflow and concentrate cooling, improving cooling whether used as intake, exhaust, or mounted to a liquid cooling radiator or heatsink.
Eight Individually Addressable RGB LEDs: Complete your CORSAIR SP RGB ELITE-cooled system with an additional fan, equipped with eight LEDs around the hub.
Your Setup at Your Command: Create vivid lighting effects with powerful CORSAIR iCUE software, bringing your system to life with dynamic RGB lighting synchronized across all your iCUE compatible products. Requires a CORSAIR Digital
Dimensions120mm x 120mm x 25mm
Package Contents1 x CORSAIR SP120 RGB ELITE Fan
4 x mounting screws
وزن الشحنة0.20 kg
أبعاد الطرد153 × 133 × 36 mm

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What do I need to control the RGB lighting on the SP120 RGB ELITE fan?

The fan requires a CORSAIR Digital Lighting Controller, sold separately, to connect to iCUE software for RGB control.

Will the 120mm fan fit alongside my existing 120mm case fans?

Yes, it shares the standard 120mm x 120mm x 25mm dimensions and 4-pin PWM connector used by most 120mm case fans.

How can I confirm the fan is running within its specified speed range after installation?

In BIOS or monitoring software, check that the RPM reads between 550 and 1500 RPM with a tolerance of +/- 10%.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.