SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
DELL
The Dell 400-ANYO is a 1.2 TB 2.5-inch SAS hard drive spinning at 10000 RPM with a 12 Gb/s interface and hot-swap tray
This new Dell 400-ANYO is a 1.2TB 2.5-inch internal hard drive with a SAS 12Gb/s interface spinning at 10000 RPM. It is built for servers and storage arrays that require hot-swap capability and enterprise-grade reliability. The drive uses a standard SAS connector for direct attachment to compatible controllers or backplanes.
This drive suits administrators populating 2.5-inch hot-swap bays in Dell PowerEdge servers or compatible JBOD enclosures. It also fits workloads needing 10K rotational speed for transactional databases or virtualisation storage tiers. Buyers whose systems lack a SAS host bus adapter or a 12Gb/s backplane cannot install this drive. Laptop users and desktop builders without enterprise drive cages should look elsewhere.
The single specification that decides fit is the SAS 12Gb/s interface. Your controller, backplane or RAID card must support 12Gb/s SAS signalling and provide power through the standard SAS connector. Without that interface the drive will not communicate or spin up. Verify the part number 400-ANYO against your hardware maintenance manual before ordering.
| Brand | Dell |
|---|---|
| Model | 400-ANYO |
| Interface | SAS 12Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
The drive uses a standard 2.5 inch form factor with a SAS 12Gb/s interface and includes a hot-swap tray designed for compatible Dell PowerEdge servers.
Slide the drive into the hot-swap bay until the carrier clicks, then press the release lever to lock it; the step often missed is fully engaging the lever so the SAS connector seats properly.
As a mechanical 10000 RPM SAS drive, it will eventually require replacement when SMART attributes show reallocated sectors or bearing noise increases; no user-serviceable parts exist.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟