نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
DELL 12V 120mm x 38mm server fan, black plastic frame, wire leads

DELL

DELL 8X765 12V 120mm x 38mm Fan for PowerEdge 1600SC server power supply

SKU CH-Y900-870N4

A 12 V, 120 mm by 38 mm replacement fan for the PowerEdge 1600SC server power supply

  • 12 V fan keeps the PowerEdge 1600SC power supply running cool
  • 120 mm × 38 mm frame matches the original chassis opening
  • Dell part 8X765 guarantees a direct replacement fit
  • Lightweight 5.1 unit simplifies installation and reduces shipping weight

Compatible Replacement Fan for PowerEdge 1600SC

This 12 V cooling fan is built to fit the Dell PowerEdge 1600SC server power supply. It serves administrators who need a direct replacement to keep their existing chassis running without modification. The unit matches the original form factor for a straightforward swap. Buyers who need a different voltage or mounting pattern should look elsewhere.

120 mm by 38 mm Frame with 12 V Operation

The fan uses a 120 mm by 38 mm frame and runs on 12 V power. In normal use it moves air through the power supply to stabilise internal temperatures. Acoustic output and power draw remain consistent with the original specification. The component weighs 5.1 units as supplied.

أبرز المميزات

  • 12 V fan keeps the PowerEdge 1600SC power supply running cool
  • 120 mm × 38 mm frame matches the original chassis opening
  • Dell part 8X765 guarantees a direct replacement fit
  • Lightweight 5.1 unit simplifies installation and reduces shipping weight

المواصفات

BrandDELL

أسئلة حول هذا المنتج

How is the Dell 8X765 12V 120mm x 38mm fan installed in the PowerEdge 1600SC power supply, and what step is often missed?

Remove the power supply from the 1600SC chassis, unplug the old fan connector, unscrew the four mounting corners, fit the new 120mm x 38mm unit, then reconnect the 12V plug before refitting the supply; the step often missed is re-seating the connector fully so the tachometer signal reaches the system board.

What maintenance or replacement will this 12V 120mm x 38mm fan need later?

Expect to clean dust from the blades and heatsink fins every 6–12 months using compressed air; if bearing noise appears or speed drops below the rated 12V level, replace the entire 8X765 fan assembly as bearings are not serviceable.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.