نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green Dell MCX383A-FCNA PCIe card low-profile bare PCB no bracket

DELL

DELL MCX383A-FCNA Single-Port Network Adapter Card XK4C4

SKU CH-9NYG-N16QN

Single-port PCIe x16 network adapter for high-throughput, low-latency enterprise workloads

  • InterfacePCI-Express
  • Dimensions6.6" (L) x 2.7" (W) x 0.8" (H)
  • Weight0.3 lbs
  • Single-port adapter maximises throughput for enterprise workloads
  • Mellanox ConnectX-3 Pro EN controller enables efficient packet processing
  • PCIe Gen3 x16 interface delivers full bandwidth potential
  • Compact low-profile PCB fits space-constrained builds at 6.6" x 2.7" x 0.8
  • Lightweight design at .3 lbs simplifies installation in dense racks

Single-Port Adapter for Enterprise Networking

The Dell MCX383A-FCNA is a single-port network adapter card built for high-performance enterprise environments. It uses a Mellanox ConnectX-3 Pro EN controller to deliver ultra-low latency and powerful throughput. The PCIe Gen3 x16 interface ensures full bandwidth potential for data centres, HPC clusters, and demanding virtualization workloads. Its compact low-profile PCB design fits space-constrained builds.

Installation Notes and Common Issues

The card installs into a PCI-Express x16 slot and requires no bracket, which is not included in the package. The low-profile PCB measures 6.6" in length, 2.7" in width, and 0.8" in height, weighing .3 lbs. Installers must supply a compatible bracket for their chassis to secure the card properly. Verify that the system provides a physical x16 slot and that the operating system includes driver support for the ConnectX-3 Pro controller.

Pre-Order Compatibility Checks

Confirm the target system has an available PCIe Gen3 x16 slot and sufficient physical clearance for the card dimensions. Ensure the chassis can accommodate a low-profile card and that you have an appropriate bracket for mounting. Check that your network infrastructure supports the adapter's single-port configuration and intended throughput requirements. Buyers needing multi-port connectivity or an included mounting bracket should consider other options.

أبرز المميزات

  • Single-port adapter maximises throughput for enterprise workloads
  • Mellanox ConnectX-3 Pro EN controller enables efficient packet processing
  • PCIe Gen3 x16 interface delivers full bandwidth potential
  • Compact low-profile PCB fits space-constrained builds at 6.6" x 2.7" x 0.8
  • Lightweight design at .3 lbs simplifies installation in dense racks

المواصفات

BrandDell
ModelMCX383A-FCNA
Part NumberXK4C4
InterfacePCI-Express
Dimensions6.6" (L) x 2.7" (W) x 0.8" (H)
Weight0.3 lbs

أسئلة حول هذا المنتج

How do I confirm the MCX383A-FCNA is operating at full PCIe Gen3 x16 bandwidth after installation?

Verify link speed and width in the OS device manager or Mellanox firmware tools; they should report PCIe Gen3 x16 with no errors.

What ships with the MCX383A-FCNA and which mounting hardware must be sourced separately?

The adapter card ships alone; a low-profile or full-height bracket is not included and must be purchased separately for your chassis.

Which Dell part number identifies the MCX383A-FCNA variant with the ConnectX-3 Pro EN controller?

Part number XK4C4 (also listed as 0XK4C4 or IL-0XK4C4) identifies this single-port ConnectX-3 Pro EN adapter.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.