نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black dual monitor stand with two adjustable arms, VESA brackets, cable-management column and weighted base

DELL

DELL MDS19 Dual Monitor Stand 19–27 in monitor accessory

SKU CH-28Y2-TZBB3 MPN MDS19

Holds two 19–27 in screens with tilt, lift, swivel, rotation and built-in cable management

  • TypeDual Monitor Stand
  • ColorBlack
  • SpecificationsTilt: -5° to 24° Lift: 5.12 in Rotation: -90° to 90° Swivel:
  • FeaturesInstall easily-no tools needed Snap monitor panels in place
  • Weight23.45
  • Supports two 19–27 in displays side by side
  • Tilt, lift, swivel and rotation adjust each screen independently
  • Quick-release VESA mounts attach Dell UltraSharp or P-series panels without tools
  • Integrated cable channel routes wires through the stand for a tidy desk
  • 12 in height range sets monitors at comfortable eye level

Dual stand for 19 to 27 inch monitors

The Dell MDS19 holds two displays from 19 to 27 inches on a single base. VESA-compatible adapters let you mount most standard monitors without tools when using supported Dell UltraSharp or P-series panels. It is built for users who want a cleaner desk with two screens side by side. The stand does not suit buyers who need to mount three or more displays or panels larger than 27 inches.

Quick-release mounting and cable routing

Snap-in brackets eliminate screws for compatible Dell monitors, while the round cable slot and internal channel hide power and video leads. This keeps the workspace tidy and makes future panel swaps faster. The benefit applies only to displays that match the quick-release pattern; other VESA screens still require the supplied adapters and screws. Buyers who rely on proprietary non-VESA mounts will not be able to use this stand.

Tilt, lift, swivel and rotation ranges

Each arm tilts from minus five to 24 degrees, lifts 5.12 inches, swivels from minus ten to 15 degrees and rotates 90 degrees either way for portrait orientation. These adjustments cover most ergonomic desk setups for dual 27-inch panels. The stand reaches its limit with heavier monitors that exceed the VESA weight rating or when a single ultra-wide screen is required instead of two separate displays.

أبرز المميزات

  • Supports two 19–27 in displays side by side
  • Tilt, lift, swivel and rotation adjust each screen independently
  • Quick-release VESA mounts attach Dell UltraSharp or P-series panels without tools
  • Integrated cable channel routes wires through the stand for a tidy desk
  • 12 in height range sets monitors at comfortable eye level

المواصفات

BrandDELL
ModelMDS19
TypeDual Monitor Stand
ColorBlack
SpecificationsTilt: -5° to 24°
Lift: 5.12 in
Rotation: -90° to 90°
Swivel: -10° to 15°
Adjustments: Tilt, swivel, rotation, lift
Recommended Use: 2 monitors
Recommended Display Size: 19" - 27"
VESA Mounting Interface: Yes
Max Mounting Pattern Size: 3.9 x 3.9 in
Max Load Weight: 13.2 lbs
FeaturesInstall easily-no tools needed
Snap monitor panels in place with ease, without needing screws or tools when attaching Dell UltraSharp or P-series monitors with Quick Release.
Compatibility
Optimized for Dell UltraSharp and P-series monitors with Dell Quick Release, Dell E-series monitors and 19” to 27” VESA compatible monitor panels. Use the included VESA adapter plate to mount the Dell E-series or VESA compatible monitor.
Weight23.45
وزن الشحنة10.64 kg
أبعاد الطرد853 × 489 × 185 mm

أسئلة حول هذا المنتج

How often should I re-tighten the VESA mounting screws after installation?

The MDS19 uses a tool-free Quick Release system for compatible Dell UltraSharp and P-series monitors, so no screws require periodic re-tightening.

Will the 5.12 in lift range stay firm when both 27 in monitors are at full height all day?

The stand is rated for two displays up to 27 in and the 5.12 in lift mechanism holds position without drift under the combined load.

Does the stand generate any noise or heat when the monitors are swivelled or rotated repeatedly?

The MDS19 has no motors or fans; adjustments are manual and produce no audible noise or measurable heat during continuous use.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.