نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Refurbished Dell 870 W hot-plug redundant power supply unit, silver metal casing

DELL

DELL YFG1C 870 W Hot-plug Redundant Power Supply

SKU CH-N6RE-BT6AE MPN YFG1C

An 870 W hot-plug redundant power supply for PowerEdge R710, T610 and PowerVault DL2100, NX3000 systems, accepting 100 to 240 V input

  • Typecomputer-internal-power-supplies
  • Maximum Power870 W
  • Input Voltage100 - 240 V
  • FeaturesDell Power Supply Hot-plug Redundant Switching Power Supply
  • Weight1
  • Hot-plug design lets you swap units without downtime
  • 870 W output powers demanding server workloads
  • 100-240 V input works worldwide without adapters
  • Redundant architecture keeps systems running if one supply fails
  • Fits PowerEdge R710, T610 and PowerVault DL2100, NX3000

Dell 870 W hot-plug redundant supply

This refurbished Dell YFG1C unit delivers 870 watts of switching power for compatible Dell PowerEdge and PowerVault servers. It is intended for administrators who need a replacement or spare module for supported enterprise chassis. The supply accepts 100 to 240 V input and fits the designated hot-plug bays in the listed systems.

Build and hot-plug convenience

The module is designed for tool-less insertion and removal while the server remains powered, allowing maintenance without downtime. Its redundant architecture means a second unit can share the load, so a single failure does not interrupt operation. The form factor matches the original Dell mechanical specification for the supported platforms.

Limits of the 870 W redundant design

Total available power is capped at 870 watts, so heavily populated configurations may exceed the budget and require a higher-capacity alternative. Redundancy only functions when two compatible units are installed in a supported chassis; a single module provides no fail-over. Compatibility is restricted to PowerEdge R710, T610 and PowerVault DL2100, NX3000 systems.

أبرز المميزات

  • Hot-plug design lets you swap units without downtime
  • 870 W output powers demanding server workloads
  • 100-240 V input works worldwide without adapters
  • Redundant architecture keeps systems running if one supply fails
  • Fits PowerEdge R710, T610 and PowerVault DL2100, NX3000

المواصفات

BrandDELL
ModelYFG1C
Typecomputer-internal-power-supplies
Maximum Power870 W
Input Voltage100 - 240 V
FeaturesDell Power Supply Hot-plug Redundant Switching Power Supply
Compatibility: PowerEdge R710, T610, and PowerVault DL2100, NX3000 Systems.
Weight1
وزن الشحنة2.72 kg
أبعاد الطرد432 × 305 × 102 mm

أسئلة حول هذا المنتج

What AC input range does the 870 W supply accept?

The unit operates on 100 to 240 V AC without any switch or jumper changes.

Which server chassis and bays does the YFG1C fit?

It is built for the PowerEdge R710, T610, PowerVault DL2100 and NX3000 hot-plug bays.

How do I install the module and what step is often missed?

Slide the supply into the bay until the latch clicks, then verify the green LED lights to confirm the redundant pair is active.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.