OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
DIYPC
Compact Micro-ATX tower with tempered glass panels, three pre-installed 120 mm ARGB fans and top 360 mm radiator support for liquid cooling
The DIYPC ARGB-M1-BK is a black Micro ATX tower built from steel with tempered glass on both sides. It accepts Micro ATX and ITX motherboards and comes with three pre-installed 120 mm ARGB PWM fans for immediate airflow and lighting.
Verify that your graphics card measures no more than 330 mm and your CPU cooler stays within 175 mm of height. Ensure your power supply fits the 170 mm bottom-mounted limit and that the board provides a 5 V addressable header if you want motherboard-synced ARGB control.
The top panel supports a radiator up to 360 mm and optional 120 mm or 140 mm fans for liquid-cooling capacity during long sessions. Magnetic dust filters at the top and bottom keep intake clean without restricting flow, while the rear and side exhaust fans maintain steady pressure under continuous load.
| Brand | DIYPC |
|---|---|
| Model | ARGB-M1-BK |
| Type | Mirco ATX Tower |
| Color | Black |
| Case Material | Steel / Tempered Glass |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | Micro ATX / ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| LED | ARGB |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 4 |
| Front Ports | USB 2.0 x 1 / USB 3.0 x 1 / Audio In & Out (HD) |
| Fan Options | Top: 2 x 120mm or 140mm fan (Optional) MB Side: 2 x 120mm ARGB Reverse Blade PWM Fan (pre-installed) Rear: 1 x 120mm ARGB PWM Fan (pre-installed) PSU top : 2 x 120mm fan (Optional) |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 2 x 120mm |
| Radiator Options | Top - Up to 360mm |
| Max GPU Length | 330 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 170 mm |
| وزن الشحنة | 6.96 kg |
| أبعاد الطرد | 552 × 457 × 282 mm |
The case allows up to 330 mm GPU length; the two 120 mm side fans are pre-installed, so measure your card against that limit
Top supports up to 360 mm radiator; the magnetic dust filter sits on the same panel and can be removed for radiator mounting
Lighting can be controlled by the manual button on the case or synced via a 5 V 3-pin ARGB header if your board has one
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟