نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
29-piece 3D printer nozzle cleaning kit in clear toolbox with needles, brushes, tweezers, wrenches, spatula

DOLLAR BOSS 3DCLEANSP 29 Pcs 3D Printer Nozzle Cleaning Kit

SKU CH-N728-3B8W3

A 29-piece maintenance set with 20 stainless-steel needles in 0.2 mm and 0.4 mm sizes, two copper brushes, two tweezers, two L-shaped wrenches and a removal spatula, all organised in a clear toolbox

  • Type3DCLEANSP
  • 20 stainless-steel cleaning needles in 0.2 mm and 0.4 mm diameters for precise nozzle clearing
  • Two organised storage tubes keep the pins sorted, protected and easy to transport
  • Two copper wire brushes and a print-removal spatula handle hot-end and bed residue
  • 6 mm and 7 mm L-shaped hex wrenches plus straight and curved tweezers cover common nozzle hardware
  • Complete 29-piece kit supplied in a clear toolbox for tidy workshop organisation

29-Piece Nozzle Cleaning Kit for 3D Printers

This 29-piece kit from DOLLAR BOSS supplies the essential tools for routine nozzle maintenance. It contains 20 stainless steel cleaning pins in 0.2 mm and 0.4 mm diameters, two copper wire brushes, two tweezers, two L-shaped wrenches and a print removal spatula. Everything is organised in a clear toolbox for easy storage and transport.

Cleaning pins brushes

The 3-inch cleaning needles clear blockages in 0.2 mm and 0.4 mm nozzles while the copper brushes clean hot beds and remove rust after heating. Two brushes allow interchangeable use during extended sessions. The 6 mm and 7 mm L-shaped wrenches fit most common nozzle sizes for quick removal and installation.

Replaces ad-hoc tools and incomplete sets

Builders who currently rely on loose needles or missing wrenches gain a complete, organised solution in one box. The kit covers nozzle clearing, hot-bed cleaning, part removal and fastener adjustments without hunting for individual pieces. Buyers who need specialised tube cutters deburring tools or larger organiser systems will require additional equipment.

أبرز المميزات

  • 20 stainless-steel cleaning needles in 0.2 mm and 0.4 mm diameters for precise nozzle clearing
  • Two organised storage tubes keep the pins sorted, protected and easy to transport
  • Two copper wire brushes and a print-removal spatula handle hot-end and bed residue
  • 6 mm and 7 mm L-shaped hex wrenches plus straight and curved tweezers cover common nozzle hardware
  • Complete 29-piece kit supplied in a clear toolbox for tidy workshop organisation

المواصفات

BrandDOLLAR BOSS
Model3DCLEANSP
Part Number3DCLEANSP
Type3DCLEANSP

أسئلة حول هذا المنتج

How do I use the 0.2 mm and 0.4 mm cleaning needles without damaging the nozzle?

Heat the nozzle to printing temperature first, then gently insert the correct needle size straight through the orifice; forcing a cold nozzle or twisting the pin is the step most users get wrong.

Which parts of this 29-piece kit will wear out and need replacing first?

The 20 stainless-steel cleaning needles and two copper wire brushes are consumables; needles can bend or blunt with repeated use, and brush bristles wear down, so they will need replacement before the wrenches or spatula.

What limits how long I can clean continuously with the copper wire brushes before they lose effectiveness?

The brushes are designed for hot-nozzle cleaning; sustained scrubbing at temperature causes the copper bristles to soften and deform, which is the first limit you hit during extended maintenance sessions.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.