نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
White 1.75mm filament spool 750g Dove White01

E3D Online

E3D Online spoolWorks EDGE Filament 1.75mm 750g Dove White01 3d printers accessory

SKU CH-05CV-W1G8Z

A recyclable PETG-based filament that combines ABS-like toughness with PLA-like ease of printing for strong, warp-resistant parts

  • ColorWhite
  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • 75mm diameter fits most common 3D printers
  • 750g spool provides ample filament for multiple prints
  • Low-odor printing creates a more pleasant workspace
  • Strong layer adhesion produces durable, tough parts

Filament for strong functional prints

E3D spoolWorks EDGE is a PETG-based filament engineered to combine ABS-like toughness with PLA-like ease of use. It delivers strong, stiff parts with exceptional layer adhesion and a naturally glossy finish. The material prints with no unpleasant fumes and is widely recyclable. It suits makers who need durable, accurate components.

1.75 mm diameter for standard extruders

The filament is manufactured to a 1.75 mm diameter, matching the most common direct-drive and Bowden extruder systems. This single dimension determines whether the spool will feed reliably through your printer’s hotend and drive gears. No other diameter is offered for this product.

750 g spool works with open-material printers

The 750 g spool fits standard filament holders and runs on any FDM printer that accepts third-party 1.75 mm PETG-based materials. A heated bed and a light coating of gluestick provide reliable first-layer adhesion. It pairs with E3D Scaffold support material for clean breakaway on complex geometries. Buyers who need water-soluble supports or a different spool weight will need an alternative product.

أبرز المميزات

  • Recyclable PETG-based material reduces environmental impact
  • 75mm diameter fits most common 3D printers
  • 750g spool provides ample filament for multiple prints
  • Low-odor printing creates a more pleasant workspace
  • Strong layer adhesion produces durable, tough parts

المواصفات

BrandE3D
ModelEdge
ColorWhite
TypeFilament

أسئلة حول هذا المنتج

What does the 1.75 mm diameter mean once the filament is loaded into my printer?

The 1.75 mm diameter matches the standard feed path on most desktop printers, so the extruder gear grips it reliably without slipping or jamming.

What interface or standard governs the spool mounting, and what does it cap in practice?

The spool uses a common centre-hole size that fits typical printer-mounted and standalone holders, limiting wobble during fast retractions.

What does the 750 g weight mean for physical fit on my printer?

At 750 g the spool is light enough for direct-drive gantries and compact enough to sit on most top-mounted holders without tipping.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.